Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 18 of 18
Thread: $99 Shop Vac?
-
18th August 2004, 10:28 AM #16Originally Posted by John Saxton
No worries with it sucking chips, it's trying to prevent the belt sander dissappearing up its own orrifice that's the issue!!!
You are correct, it owes me nothing (and is in very good shape), some of the adaptors may be a bit tricky on a lathe though.... the ROS connection is oval, the Plane is almost triangular. I am thinking of building a styrene mould and glassing over to suit each particular tool...will post any results if I get around to it.
I'll just keep wearing earplugs I guess.
Cheers,
P
-
18th August 2004 10:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th August 2004, 11:52 AM #17
Last weekend I bought a Karcher 2201 from Bunnies for $199. all the fittings and not too noisy - has about a 15ltr capacity - add it to a triton dust bucket and your away.
I just need to dick around to make a cyclone out of the dust bucket and I should be perfect.
cheersZed
-
18th August 2004, 09:20 PM #18
B,Midge,I have resorted to using a bicycle tube with cable ties on the odd occasion where the shop vac dosen't exactly fit some of my other tools.
HTH
CheersJohnno
Everyone has a photographic memory, some just don't have film.