Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
22nd May 2020, 11:26 AM #1Senior Member
- Join Date
- Dec 2009
- Location
- Melbourne
- Posts
- 100
Suggestions for external lean-to dust collection system
Planning an external lean to style box for the dust collection and air compressor in (out of?) the new garage. Only have single phase, so reusing a 2hp generic extractor for the motor, and originally I was just going build it around a Super Dust Deputy or the Thien baffle i currently use with a pleated filter exhaust. But some reading on here has got me thinking about a 6" setup, which means bigger everything.
My greatest restriction is the size of the lean to i can fit. Need to keep it within 750Dx1000Wx1600H, which makes 44gal drums (cone plus drum is 1700mm H) a bit difficult, especially as the purpose of the lean to is to enable better muffling/noise dampening and that requires space and muffling foam.
Currently thinking a half or two thirds 44gal for the collector and a shortened 22" cone for the collector may work well. I know it wont be ideal, but trying to maximise space.
-
22nd May 2020 11:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
new dust collection system for shed
By robyn2839 in forum WOODTURNING - GENERALReplies: 7Last Post: 17th December 2018, 05:03 PM -
Dust Collection System
By mcintoad in forum TRITON / GMCReplies: 7Last Post: 28th January 2010, 10:28 AM -
Sturdee’s main dust collection system. or The Sturdee Midi Cyclone.
By Sturdee in forum DUST EXTRACTIONReplies: 47Last Post: 29th May 2009, 05:05 PM -
homemade dust collection system
By skeeterpeter30 in forum DUST EXTRACTIONReplies: 9Last Post: 28th February 2004, 05:29 PM -
Triton dust collection system
By STEPHEN MILLER in forum TRITON / GMCReplies: 1Last Post: 11th July 2000, 01:34 PM