Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: bargin cyclone system
-
14th July 2011, 09:13 PM #1Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1,205
bargin cyclone system
was at an auction yesturday and brought 3ph cyclone plus a massive collection bin and full factory worth of duct work all for $500 plus labour to pull it out and transport it, took us all day to dismatle and get it ready to load onto truck in the morning.
few picks as we started to pull her down today used a chain block and slings off the roof purlins to hold weight while we took out a few walls and lowered her down.
also a pic of the complete set up which is 20k plus bin plus duct work.
specs are
11.0 kW electric motor, 3 ph - 415 V complete with 5 mm laser cut steel fan housing and backward inclined centrifugal fan impeller.(capacity 5000 cfm at 2500 Pa. resistance).
• One bank of relief air pleated filters (2.5 metres x 600 dia), manually operated filter brush cleaning system as standard with the auto brush drive motor & gear box optional.
-
14th July 2011 09:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th July 2011, 09:33 PM #2
...strewth... a bit of overkill for the shed
I am jealous though
-
14th July 2011, 09:38 PM #3Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1,205
for the factory but i dont actual have room for it, will use it when i move within next 12 months.
we currently have 1 four bag 3ph collector woth 200mm dia inlet setup for the wide belt also have 2 two bag 3ph collectors one setup for panel saw other is used on spindles / thicknesser / miter saws.
-
14th July 2011, 10:36 PM #4
Bargain.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
Similar Threads
-
Bargin 4mm chisel Shepparton+
By Ben from Vic. in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 10th August 2009, 09:00 PM -
Sturdee’s main dust collection system. or The Sturdee Midi Cyclone.
By Sturdee in forum DUST EXTRACTIONReplies: 47Last Post: 29th May 2009, 05:05 PM -
bargin lucas
By jmaxwell in forum TIMBERReplies: 17Last Post: 28th April 2008, 10:48 AM -
Western Syd Bargin
By wheelinround in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 3rd October 2007, 04:14 PM -
who wants a bargin lathe in sydney
By soundman in forum WOODTURNING - GENERALReplies: 8Last Post: 10th July 2005, 11:27 PM