Thread: Clearvue CVMax Filters & Wireless start/stop

Why do you need to use filters, just about every Clearvue in Australia is vented straight to atmosphere as was your cyclone.

Originally Posted by Chris Parks

Why do you need to use filters, just about every Clearvue in Australia is vented straight to atmosphere as was your cyclone.

May seem a silly question, but how much dust is not captured in the cyclone and expelled through the vent outside? The small shed outside is quite close to my neighbours property, so I'm trying to reduce any noise and dust that might get pushed over to their house.

You lucky bugger!

I don't have one so don't take my comments with a grain of salt.
- From memory the filters are truck filters so if you go to a truck mechanic/supplier they should be able to help you out. Your biggest issue will probably be fabricating a housing for whatever you get. You'll need to size your filters according to the output to limit back pressure. I'm sure Chris (a member here) will provide more guidance on size if you're stuck.
- The switch should be easily relocated to wherever you want, obviously will need to be done by a sparky. Having multiple start locations... thats completely out of my depth as my DC has a remote.

There is no detectable dust in the exhaust air and I guarantee you won't see any unless the bin becomes too full. If that happens with filters then it becomes a major issue but if it happens with an open exhaust a broom will fix the problem. I only ever sold filters for unusual sites such as rented premises that could not have the wall modified.

Hi Raymond
Where in Brisbane are you located?
I live on Macleay Is (Moreton Bay Southern Bay Islands) and have a FULLY AUTOMATED Clearview 1800 with filters set up.
If I can assist you PM me your phone number
Ron

Should you decide to put filters on your ClearVue here are some companies you can ask. You can likely find more if you do some searching. If you are going to mount them to filter from the inside towards the outside be sure to mention it to them. Normally industrial filters have the air flow from outside to the centre of the cartridge.

Supplier of dust collector filter, bags, cartridges and cyclones

Dust Collector Cartridge Filters - Pleated Cartridge | Filter Makers

Pete

Originally Posted by woodlogic

Hi Folks,

- Does anyone know of a wireless start/stop tag that can be integrated into a VSD or another method to start the machine that doesn't require me walking to the machine every time to operate? I'd prefer a solution that can be turned on/off at each of my woodwork machines (8 in total).
​

Auto Blast Gates PTY LTD

I've got these and am very happy with them.