Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 24 of 24
Thread: ClearVue cyclone installation
-
21st October 2011, 10:10 PM #16GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
I have a better way of cooling the motor but you need a very capable DE, one of our cyclones would handle it easily. Totally enclose the motor with a ducted cover and run a smallish pipe into the main duct from the motor enclosure, it would not have to flow a million CFM just enough to cool the motor. The hot air would get dragged into the duct and carry the heat away.
Plan 2. Run the pipe into the exhaust and set up a venturi to drag the air through the motor, this one might require a bit of fiddling around but would work.
To monitor temps get one of those remote reading temp thingos from Jaycar and adjust flow to suit.CHRIS
-
21st October 2011 10:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st October 2011, 10:13 PM #17.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
I've just about finished my frame and coach screwed it onto the back of the shed. The enclosure is 600 deep, 1800 wide and 2340 high at one end and 2440 at the other. I'm using bits of roofing grade pine that ranges from 70 x 35 to 120 x 35 and some 90 x 45 so it's a bit of a bitza - but once its all clad with colorbond it won't matter.
-
22nd October 2011, 07:11 PM #18That fan looks like a bit of monster, but how many dB does it generate? I assume you open the window up behind the fan to create a cross flow?
At the workbench the fan generates about 55dB at low speed (the usual setting) and about 76dB at full throttle. In fact since the cyclone was put in I donīt use the fan much in winter , but in summer the fan is essential for cooling even though the shed is insulated and I was hoping that it would blow a bit of dust of the shed as well.
By outflow do you mean the muffler?
I mean the outflow tract of the cyclone both proximal and distal to the muffler as well as the muffler itself.
BobL: Please continue to take the time to comment and criticise when necessary.
-
22nd October 2011, 07:54 PM #19.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
That's not too bad.
In fact since the cyclone was put in I donīt use the fan much in winter , but in summer the fan is essential for cooling even though the shed is insulated and I was hoping that it would blow a bit of dust of the shed as well.
mean the outflow tract of the cyclone both proximal and distal to the muffler as well as the muffler itself.
BTW this is where I got some of my data from - I can't remember where I got it from - It's for smooth walled metal pipe but it will be pretty similar for PVC.
Cheers
-
23rd October 2011, 10:59 PM #20.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
I posted some WIP pics of the enclosure on my shed fit thread
-
25th October 2011, 08:51 PM #21GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
I made the inquiry about the exposure of the PTEG material to sunlight and no one seems particularly concerned about the issue. I can't see it being much of a problem because all the ones I know of outside have been installed under shelter so not being exposed to direct sunlight.
CHRIS
-
25th October 2011, 09:28 PM #22.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
Do you mean PETG? if so it comes in 2 forms - UV and non-UV stabilised. The non-UV PETG will degrade even when not directly exposed to sunlight as UV is easily reflected off many surfaces. The UV stabilised version has a nominal 10 year outdoor lifetime. It's not just for looks, UV effects strength as well and it become brittle over time.
Also did you ask the 'mericans? They might not know since they don't have as high a UV exposure as we have here in Australia,
-
25th October 2011, 09:38 PM #23GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
-
26th October 2011, 12:47 AM #24
looks like a great set-up, but as others have mentioned, the ventilation to the motor/fan is required. My other concern would be the noise at the neighbours fence, 72dB is very loud. On our freeways here in Qld, noisewalls are required for >68dB. What do your neighbours think?
Neil____________________________________________Every day presents an opportunity to learn something new
Similar Threads
-
Clearvue Cyclones in Oz
By Chris Parks in forum DUST EXTRACTIONReplies: 10Last Post: 2nd March 2011, 10:52 PM -
clearvue closes down
By blackhole in forum DUST EXTRACTIONReplies: 5Last Post: 2nd May 2010, 11:17 AM -
my clearvue cyclone setup.
By JDarvall in forum DUST EXTRACTIONReplies: 28Last Post: 18th January 2009, 07:05 AM -
ClearVue Cyclones
By Hugh Reid in forum DUST EXTRACTIONReplies: 13Last Post: 20th April 2008, 11:35 PM -
ClearVue Cyclones
By Hugh Reid in forum DUST EXTRACTIONReplies: 5Last Post: 13th January 2006, 12:36 PM