Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 18 of 18
Thread: my cyclone build
-
16th September 2013, 10:01 AM #16Intermediate Member
- Join Date
- Aug 2013
- Location
- Melbourne
- Posts
- 48
-
16th September 2013 10:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th September 2013, 11:59 PM #17
When I did some very early tests on the whole dust collection thing I set up a much smaller collection box and the dust movement in the box was a lot more violent, that was a very simple setup and not the best comparison with a full on cyclone but it did indicate the motion and direction of the air.
My collection box is fairly large, ~1100x1100x870 a tad over 1m3 so that might have a calming effect, also I built mine with the 3D length cone, ~1200 long, that also might have a calming effect.
Here's a pic looking up into the cone, when I took this pic it hadn't been in operation for long but it is possible to see the paths of dust against the inside of the top of the cone and then diminishing off to nothing, this suggests (to me at least) a longer cone does have some calming effect.
looking up the cone.jpg
Pete
-
17th September 2013, 09:51 AM #18Intermediate Member
- Join Date
- Aug 2013
- Location
- Melbourne
- Posts
- 48
Similar Threads
-
Ultimate DIY Cyclone Build Thread
By HeadScratcher in forum DUST EXTRACTIONReplies: 66Last Post: 11th January 2013, 09:02 PM -
help me build a basic flat build bed trailer for my kayaks
By gros21 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 13th October 2011, 08:47 AM -
Trailer - to build or not to build
By motegi in forum TRAILERS & OTHER FABRICATED STUFFReplies: 17Last Post: 6th May 2009, 03:07 PM -
Cyclone
By 9Fingers in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 1Last Post: 20th March 2006, 02:49 PM -
Cyclone
By Finger Dicer in forum DUST EXTRACTIONReplies: 6Last Post: 21st March 2005, 09:41 PM