Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Huanyang vfd/inverter parameters
-
31st August 2015, 04:36 PM #1SENIOR MEMBER
- Join Date
- Aug 2003
- Location
- Loxton, SA
- Posts
- 539
Huanyang vfd/inverter parameters
I am wanting to test the motor that will drive the blower of my cyclone; it is a 3kw 3 phase motor being run through a 3kw rated Huanyang vfd.
I am confused about the vfd manual's descriptions of certain parameters.
PD003 is for setting the "main frequency". I take this to mean the mains power supply frequency (i.e. 50Hz).
PD004 is for setting the "base frequency". I understand this to be the frequency the motor should be supplied with as stated on the compliance plate. My motor has figures for both 50Hz and 60Hz. As I would want maximum performance from the blower I would set this at 60Hz.
PD005 is for setting the "maximum operating frequency". I understand this to be the highest frequency output I desire from the vfd. Presumably this should be set at 60Hz since I do not want the blower motor running any faster than the maximum compliance plate figure.
Am I right about any of this? Advice from anyone with experience of an Huyanyang vfd would be greatly appreciated.
Cheers
-
31st August 2015 04:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Huanyang Inverter 4kw
By ManiaKsLV in forum CNC MachinesReplies: 0Last Post: 31st March 2014, 08:16 AM -
NEEDED: Numeral Control Parameters for Morbidelli Author 504 K!!!
By unleash_jad in forum CNC MachinesReplies: 2Last Post: 27th July 2013, 08:16 AM -
huanyang inverter
By holder1944 in forum ELECTRONICSReplies: 3Last Post: 22nd July 2013, 07:04 PM -
HEEELP please Huanyang inverter
By SAISAY in forum CNC MachinesReplies: 8Last Post: 13th January 2013, 12:42 PM -
Box design parameters ?
By tonysa in forum BOX MAKINGReplies: 2Last Post: 15th May 2006, 08:52 PM