Let's see what we can do.....
Thanks Bob, I thought it may have been a bit restrictive with just those vents. The doors will be the same monoclad as the walls, was thinking if I was not to seal up the top and bottom of the sheets would this be enough to help along with the vents? I do have more vents, could add them to the door panels.
Oh, and at the top of the door opening there is a gap of 135x45x800 (see image) where I have not fitted a bearer, this could also remain open as the doors will fit just under the roof line.
Let's see what we can do.....
Thanks tonzeyd, I have started on the doors this arvo, just ended up making a frame from 90x35 and a noggin in the centre then screwed 12mm ply to it. Will have batts in them also, then the colourbond monoclad. There is plenty of width and length to the shed so it doesn't touch the walls at all. I cut the hole in the ply oversized for the duct too. The only thing I will check on is the hole in the shed wall as the duct is a tight fit there. I still have a bit to do to get the enclosure finished so it may be a few weeks away before I get to turn the DC on in the enclosure. Will see how I go. Cheers Cal
Sent from my iPhone using Tapatalk