Thanks: 
Likes: 
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
Thread: Remote controls
-
2nd June 2020, 05:16 PM #16
GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
That’s OK I know you’re not a terrorist
-
2nd June 2020 05:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd June 2020, 09:00 PM #17
Novice
- Join Date
- Sep 2013
- Location
- singleton
- Posts
- 16
IVAC MSC pro automated system controller, there is a paragraph that mentions 3 phase, the product is in dust extraction.
-
3rd June 2020, 08:47 AM #18
GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 1,166
you mean https://www.timbecon.com.au/msc-pro-...tem-controller ? All that does is control power in an NVR, and in a 3-phase system it requires an NVR to be already fitted and this controller just turns off the NVR. So it's not quite as simple as buying this and you're done....
-
3rd June 2020, 10:06 AM #19
The Laird
- Join Date
- Jan 2007
- Location
- Katoomba NSW
- Posts
- 4,773
An expensive remote. $300 for the controller, another $60 for the remote and probably a couple of hundred for an electrician to wire it in. I could make a plug and play option but there's just not enough demand to make it worth the time and effort.
If you're running off a VFD a remote is simple and cheap to fit.
Reply With Quote
Similar Threads
-
Lathe feed controls
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 27th May 2019, 07:10 PM -
A Box to hold all those TV controls
By firey in forum BOX MAKINGReplies: 9Last Post: 21st December 2010, 11:24 AM -
TIG Controls explained.
By 19brendan81 in forum WELDINGReplies: 7Last Post: 28th May 2009, 01:22 PM -
Arlec Remote Controls
By Big Shed in forum HAND TOOLS - POWEREDReplies: 20Last Post: 13th September 2007, 08:00 PM
