Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
28th June 2014, 07:38 PM #1Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Shop vac hoses going flat. How to fix/prevent? And other questions
Hi all, got a few questions about shop vac hoses.
Got a Festool MIDI and CT33 and the hoses (27mm) have started to go flat (oval shaped). Before I go replacing them, is there any way to re-shape them? If not, are there any tricks to stop it happening?
Also, is going up to a 36mm hose on the CT33 worth the extra cost? It's mainly hooked up to a 150mm ROS, with occasional biscuit joiner use. The sander is designed to thread directly onto 27mm hose without any adapter, so not sure if you can even get reducers that will work.
Finally, is the Festool hose really worth the massive premium over generic hose from a vacuum supplier?
-
28th June 2014 07:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th June 2014, 08:44 PM #2
Going to the 36mm hose is definitely worth it, and it's really easy to rig up an adaptor:
https://www.woodworkforums.com/f58/festool-vac-ducted-system-184637
I eschewed the Anti-satic hose in favour of the Non-AS for two reasons:
- less cost, and I've never had a static shock from the non-AS, and nor do they seem to get covered in dust (from static)
- Much better behaved than the AS - no self-recoil, and is easy to manipulate into the required positon
-
8th July 2014, 04:09 PM #3GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Is it going flat when being used or for some other reason.
CHRIS
-
8th July 2014, 10:31 PM #4Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
8th July 2014, 10:57 PM #5
-
8th July 2014, 10:59 PM #6Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
12th July 2014, 10:15 PM #7GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
The 'Mr Nozzle' brand vac hoses sold by Lee Valley and Rockler (and others) seem to be identical with the Festool non-AS vacuum hoses except for the colour (flouro orange) even down to the rotating cuff at one end - I have one that has been lying around the shop for several years now without any noticeable damage.
Similar Threads
-
Connnecting 32mm and 38mm vacuum hoses
By Dengue in forum WOODWORK - GENERALReplies: 6Last Post: 25th January 2010, 08:32 PM -
joining acetylene hoses
By fuzzy in forum WELDINGReplies: 11Last Post: 23rd November 2009, 07:50 PM -
Air hoses
By HD200Renegade in forum SAFETYReplies: 21Last Post: 3rd July 2007, 08:02 PM -
Type of air hoses
By Pulpo in forum HAND TOOLS - POWEREDReplies: 4Last Post: 28th June 2007, 01:22 PM