Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Join Date
    Jan 2015
    Location
    Latrobe Valley
    Posts
    160

    Default Youtube find - Convenient blast gate manual control

    Interesting clip from Youtube I stumbled across regarding manual blast gate control.
    Not quite sold that the effort vs reward is there and that there could be some serious refinement/improvements, but thought it was a genuine original approach to the blast gate problem.


  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Mar 2008
    Location
    Hobart, Tas
    Posts
    1,211

    Default

    That was indeed a very clever and elegant solution, and has me thinking. I've got a long bench with a range of smaller tools (drill press, router, belt sander, SCMS), and the most space efficient place to run the pipe is along the floor behind it, but have been considering alternatives due to not being able to access a blast gate in that configuration. A remotely operated blast gate could be an option allowing me to retain the preferred route

  4. #3
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    1,014

    Default

    Cunning. Bit of work but good result

  5. #4
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    Will be a great advantage for my future setup, but Cosmas Bauer the dear bugga does not appear to have plans available.
    My brain being where it is with tooo many projects/things happening around me cannot draw anything useful in plans.
    I have googled and found nothing, but thats not to say the plans are hiding somewhere
    anyone know or seen anything please.
    I would love to grow my own food, but I can not find bacon seeds

  6. #5
    Join Date
    Aug 2007
    Location
    Saskatoon, SK, Canada.
    Posts
    1,436

    Default

    If you don't need a lot maybe a few scrounged throttle controls from an old boat. Similar principles.

    Pete

  7. #6
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    you sir, are a man who thinks outside the square.
    I would love to grow my own food, but I can not find bacon seeds

  8. #7
    Join Date
    Aug 2007
    Location
    Saskatoon, SK, Canada.
    Posts
    1,436

    Default

    Well building on my brilliance. Many boats use Teleflex cables because they are a push pull arraignment like the Bowden cables the YouTube dude took from a bicycle. Motorcycles use them too, usually in the form of throttle or clutch grips. Lots of cars are using push pull cables in the gear shifts with similar cables for gas, trunk and hood latches. They are everywhere but we take them for granted. Oh I suppose jet skies and quads will have some too. We just have to look around and unlock our imaginations.

    Pete

  9. #8
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    here I was thinking about the design plans and how to make them and your talking about the cables drrrr Ive got 6 cables at home already from old bikes etc...

    back to the drawing board.
    I would love to grow my own food, but I can not find bacon seeds

  10. #9
    Join Date
    Feb 2015
    Location
    Indiana, US
    Posts
    46

    Default

    Interesting device and someone will do a 3d print to make them.

  11. #10
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    Ok defeat admitted. I have tried designing this but, considering I was tossed out of 1st year maths...'your a bl***y disruption to this class, why dont you spent time with the principal'...which I did and he admitted that maths wasnt his strong point either.
    I am planning a machine bench that will have router table, SCMS & hopefully bench drill press with a 14" band saw at one end. I want to run 150mm pipe along the floor behind this and each machine have its own blast gate operated the same as our dear German fiend has designed.

    He will not reply to emails and I cannot work out the maths calculations to make the handle cable end ( not the blast gates end)

    could someone please help me... love you forever, I'll be your best friend etc etc
    I would love to grow my own food, but I can not find bacon seeds

  12. #11
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    what maths do you need ? You've obviously thought through this more than me, so give me a start. (I did OK in maths at school, but agreed with the Uni lecturers to spend more time in the Computer Science labs)

  13. #12
    Join Date
    Feb 2018
    Location
    Ipswich
    Posts
    103

    Default

    You can buy throttle cable kits where you solder the ends on, so I'd build the components and then fit the cable at one end and cut to length.

  14. #13
    Join Date
    Aug 2007
    Location
    Saskatoon, SK, Canada.
    Posts
    1,436

    Default

    I think Tony is hung up on making the self locking/unlocking quadrant. He wants drawings or dimensions of those parts. I feel while neat they are a lot of work that could be accomplished in other ways more easily. A thumb lock much like the hand brake in the car holding against a spring that normally keeps the blast gate closed for example. Or even simpler a detent you slide the leaver over into to lock it open against a spring.

    Pete

  15. #14
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    If it's the detent mechanism then I reckon it wouldn't be too hard just to take a stab at it. I reckon there were several if not tens of prototypes to get something that "just worked" like we saw, so reproducing it probably wouldn't need more than half a dozen attempts Get some screen shots and rough out some dimensions from them based on hand / finger sizes and things like the X mm pin he uses in the follower.

  16. #15
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    err whats a 'detent' its not packing up after a weekend away, I know that.
    I would love to grow my own food, but I can not find bacon seeds

Page 1 of 2 12 LastLast

Similar Threads

  1. blast gate measurements.
    By Tonyz in forum DUST EXTRACTION
    Replies: 6
    Last Post: 26th May 2019, 06:11 PM
  2. Blast gate positionsi
    By Dez Built in forum DUST EXTRACTION
    Replies: 7
    Last Post: 3rd July 2016, 09:23 PM
  3. Combining a wye with a blast gate
    By zelk in forum DUST EXTRACTION
    Replies: 4
    Last Post: 18th January 2010, 09:55 AM
  4. Blast gate with 100% efficiency
    By Wongo in forum HINTS & TIPS
    Replies: 10
    Last Post: 30th June 2005, 11:45 PM
  5. Blast Gate
    By ozwinner in forum DUST EXTRACTION
    Replies: 5
    Last Post: 9th May 2004, 07:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •