![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 29
Thread: 1/4 SCALE MODEL MG TC
-
23rd September 2014, 08:39 AM #1
Novice
- Join Date
- Jan 2009
- Location
- geelong
- Posts
- 22
1/4 SCALE MODEL MG TC
TTTTTT.jpg76FGFR7FGV.jpg20140819_150856.jpgaewrd6cy7vf.jpgddu.jpgPICT0002.jpg
Hi ,
This 1/4 scale 1945 MG - TC is scratch built (mainly from scrap timber ) .
The model is all wood with some paper used for gauges, engine and body id plates and radiator hoses.
There has been no use of metal or plastics in this - as stated in the heading - most of the wood was regarded as scrap and destined to end up in another blokes wood heater.
The exception was lengths of dowel bought from a local hardware .
The model is a true 1/4 scale and measures at just under 1 metre long.
Work started on this in early November 2013 and completed in early September 2014.
I started this model using a drawing -
Although not accurate ,This drawing gave me details such as wheel size and overall length to work from.
The MG - TC wheel spoke pattern had to be worked out from photos of the real thing as well as the "old" compass , pencil and ruler ( All 48 spokes per wheel ).
The model has full mechanical detail -
The steering box is a working model of the real thing,
The internal working parts are a Da Vinci screw and matching gear , This is connected to an idler arm and steering rods .
The door catches operate with the use of slide gearing that I had to work out to fit a 20mm x 20mm internal space ,The door hinges work and rear side curtain compartment opens and closes.
The universal joints on the tail shaft function, And the bonnet or hood sides and tops open and close in the "concertina fashion "of the full sized car.
The body shape was worked out with cardboard templates I tried - cut and tried again and again to finally get right.
A model of this scale requires large pieces of timber (I only had a couple of pieces of cedar large enough to cut the body panels from ) .
Card templates can be perfected before any timber is cut.
The model is finished with wood wax.
I entered this model in The 2014 Royal Melbourne Show.
It was awarded ...........a first place and best in woodwork.
Note : This thread has been rewritten as I failed to mention that this model was mainly derived from "scrap timber" I think that was an important fact that should have been mentioned - Also it was originally typed in capital letters - This was seen to be worth a mention so it has been amended.
Thanks again .....................................................Wayne Nicholls.Last edited by waynnicko; 24th September 2014 at 07:00 AM. Reason: ADDED PHOTO
-
23rd September 2014 08:39 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd September 2014, 08:49 AM #2
Wayne , What a magnificent piece , your attention to detail is outstanding. Makes my puny little 1/10 scale MG TC look like a K Mart toy.
Congratulations Wayne ( please pm me I would love to have a look at it ) John.
-
23rd September 2014, 08:55 AM #3
Novice
- Join Date
- Jan 2009
- Location
- geelong
- Posts
- 22
[QUOTE=nine fingers;1808385]Wayne , What a magnificent piece , your attention to detail is outstanding. Makes my puny little 1/10 scale MG TC look like a K Mart toy.
I will give you a look at it when it gets back here......... WayneLast edited by waynnicko; 23rd September 2014 at 10:37 AM. Reason: THREAD NOT APPEARING IN NEW POSTS?
-
23rd September 2014, 10:45 AM #4
Magnificent! What detail.
Not hard to see why it won first placeDallas
-
23rd September 2014, 02:43 PM #5
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
brava
brava
brava
-
23rd September 2014, 02:46 PM #6
GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,729
Saw it yesterday at the Show - absolutely brilliant.
Tom
"It's good enough" is low aim
-
23rd September 2014, 03:23 PM #7
Outstanding work.
Truly wonderful Craftsmanship!
Congratulations.
Cheers
Trev.
-
23rd September 2014, 05:47 PM #8
Not fair.... you got to see this masterpiece for real, John has an appointment to see it.....bit far for me but would love to see it up close....
MAGNIFICENT Wayne, you have done yourself very proud with this beautiful model, indeed......VERY WELL DONE, SIR..
Cheers, crowie
PS - Just been thinking Geelong area sure has some extremely good toy and model makers....
-
23rd September 2014, 06:17 PM #9
GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,729
-
23rd September 2014, 06:19 PM #10
-
24th September 2014, 01:17 AM #11
Holy cow, that is beautiful!! Congratulations. Outstanding work.
-
24th September 2014, 02:16 PM #12
Wayne.,
You blow me away with your models. I think about them a lot .The effort you put into finding the fine details and getting them spot on is one thing,
But creating it in wood is really magic .There is no blocky make do bits its all scale.
A scale working steering box! next will be a scale 4 speed gearbox
You are by far the best Model maker I have met
Keep it going Wayne
Cheers
RossBack To Car Building & All The Sawdust.
-
24th September 2014, 03:20 PM #13
Novice
- Join Date
- Jan 2009
- Location
- geelong
- Posts
- 22
Thanks Aussie
Jeez Aussie you'll give me a big head - With praise like that Ha ha - As far as a gearbox goes - Well that might be included in a future project. Any ideas ?
The internet is a great source of reference - To see how things work in pictures is a great help .
There is so much information on it .To see the real item of what you're trying to model makes it possible for me . .
thanks again Wayne.
-
24th September 2014, 09:06 PM #14
Awesome work Wayne. We certainly have some great artists on this forum, thanks for sharing.
Cheers, ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
24th September 2014, 09:09 PM #15
Novice
- Join Date
- Jan 2009
- Location
- geelong
- Posts
- 22
Similar Threads
-
Scale Model Plans
By Yonnee in forum SCALE MODELLINGReplies: 5Last Post: 12th August 2018, 06:54 PM -
Scale model tank
By wireliner in forum TOY MAKINGReplies: 3Last Post: 8th February 2014, 10:51 AM -
40 Tonne Model 1:1 Scale
By Mutawintji in forum SCALE MODELLINGReplies: 24Last Post: 23rd March 2013, 01:06 AM -
40 tonne Model. Scale 1:1
By Mutawintji in forum METALWORK FORUMReplies: 0Last Post: 18th March 2013, 08:51 AM -
Building a scale model
By Borneogoat in forum BOAT DESIGNS / PLANSReplies: 7Last Post: 12th December 2009, 07:53 AM