Needs Pictures: 0
Results 1 to 15 of 46
Thread: 1917 Ford Truck
-
21st May 2014, 06:46 PM #1
1917 Ford Truck
I liked the look of this model in the Toys & Joys catalogue so I purchased it along with a couple of other plans. It is a very basic pattern & I wasn't going to do a WIP, but I thought if I am going to build it I may as well show it. First two photo's are the chassis with front & rear axle's just sitting in place, the fender support cross member & the four support's for the rear tray. Next is what will be the fender's ready to be cut out & shaped.Cheer's Jim.
-
21st May 2014 06:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st May 2014, 08:33 PM #2
Front row seat.....
Wow Jim, You are certainly having plenty of shed time.... now that's got to be a good thing....watching this one, thank you, Cheers, crowie
-
22nd May 2014, 06:52 PM #3
1917 Ford Truck
We had some time in the shed today, cut out the windscreen panel, the engine block & the radiator. Semi finished the fender's & the fender support's. Last is it's starting to look like a truck. In the background is what it should look like when it's completed. Cheer's Jim.
-
24th May 2014, 06:49 PM #4
1917 Ford Truck.
A couple of hour's in the shed today & we have the seat, with purple heart padding & the pedal box with ebony pedal pad's. The tray is cut to size but still a lot to do there. Regard's Jim.
-
24th May 2014, 07:14 PM #5
The purple heart is going to shine on that seat. John.
-
25th May 2014, 07:44 PM #6GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,422
Looking good - nice T Model.
I really like Fords.
Regards
Keith
-
26th May 2014, 10:01 PM #7
1917 Ford Truck
John & Keith, I appreciate your comment's, thank you both. The lawn needed mowing today so not much time was spent in the shed. I shaped the "canvas" roof & cut out the tray base for the stake's that hold the side's & the end's of the tray. No photo's but hopefully some time will be spent in the shed tomorrow. Regard's Jim.
-
26th May 2014, 10:43 PM #8GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,422
-
27th May 2014, 08:26 AM #9
-
27th May 2014, 06:54 PM #10
1917 Ford Truck.
Pete, I must say I agree with you 100% on that one. After Keith identified this truck as a model T I had a look on the internet for any variations & found out the rear suspension was a transverse spring. This is my attempt at that suspension. The original plan had a 3/4 " square axle, this is not perfect but I think it look's a bit better. Next pic is the "canvas" hood or roof & the last is the tray with stay's, it still need's some shaping & a gullet fitted all around the lower section to be finished.Regard's Jim.
-
27th May 2014, 07:50 PM #11GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,422
Jim,
The Ford is looking great. I will love watching you make this unit. Please put lots of Work in Progress photos on this thread for us to enjoy.
Regards
Keith
-
28th May 2014, 06:44 PM #12
1917 Ford Truck
We are now at the assembly stage, two view's of the fender's attached to the chassis & the grill mated to the engine housing. Next I will spray the underside's & the hard to get to place's with estapol polyurethane satin before any more assembly. This hopefully will give a proper cover all round.Regard's Jim.
-
28th May 2014, 07:08 PM #13
Your Ford T takes me back a few years (2010) when I made a 2 seater T Model.
Attached a couple of photos of the front and rear springs. John.
-
28th May 2014, 09:26 PM #14GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,422
Jim,
Your T Model is looking really good.
As I said before - Love Fords
Keith
-
29th May 2014, 01:34 AM #15
Going a great job and thanks for posting your progress. I like your "spring" mode. Much better than what the plan called for.
Similar Threads
-
Toys for Big Boys - 1929 Ford Stake Bed Truck
By BigDBigD in forum SCALE MODELLINGReplies: 6Last Post: 20th April 2018, 01:00 PM -
Chinese Lathes 1917 - 1919
By Paul39 in forum WOODTURNING - GENERALReplies: 5Last Post: 25th July 2012, 01:58 AM -
48' Ford Monster Truck
By bj383ss in forum TOY MAKINGReplies: 30Last Post: 15th July 2011, 04:57 PM -
T Model Ford Fire Truck
By STAR in forum TOY MAKINGReplies: 15Last Post: 29th June 2010, 09:55 AM -
1917 Dado panels - polish or wallpaper?
By Classical Dj in forum FINISHINGReplies: 13Last Post: 31st December 2007, 04:26 PM