Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Canadian Canoe
-
21st January 2013, 03:24 PM #1Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
Canadian Canoe
Over the past couple of weeks I've been putting together a scale model of a Canadian Canoe.
I've always wanted to build a wooden boat, and I figured a miniature would give me an idea of what I was in for when I attempt the full size thing. I cheated and bought a kit though - Midwest 949 for anyone interested.
Scale: 1/8
Length: 590mm
Materials: Basswood, cherry and balsa. All held together with thin CA.
Finish: Six coats of poly, rubbed back between each one.
Rather than posting lots of photos, I've attached a short stop-motion video of the build (less than 2 minutes):
-
21st January 2013 03:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st January 2013, 04:05 PM #2
That's a pretty neat job there SJM.
Do you think it has helped you get the feel of what might be required for a full size build?
This ( a full size one) is on my project list but I am not sure it will ever make it, life keeps getting in the way.
I saw some really nice ones in Canada recently and the quality of workmanship was excellent. Price was pretty amazing also.
Cheers, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
21st January 2013, 07:19 PM #3Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
Yes, it was a worthwhile exercise. I learned many things that would help with a full size build.
For example, I should have layed out all the planks and sorted them by color initially, rather than just selecting a random plank. This would have given a nice color graduation from top to bottom. Also, the bevelling on each plank is critical - on a small scale, you just sand each one until it fits, but on a larger scale, I'd need some sort of jig since the angle on each plank is different, and varies along the length. And I'd need to buy lots more clamps - you can't use clothes pegs on a full size one!
-
21st January 2013, 07:42 PM #4GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
Nice work. Nearly misread the post, thought that it was a full scale canoe held together with CA! Nanigai beat me to the punch with a full scale build. Well done
-Scott
-
21st January 2013, 08:39 PM #5"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
22nd January 2013, 09:57 AM #6
Top marks for WIP photos....
G'day Ian, Top marks for WIP photos....
When I first saw the thread I wondered why a boat was in the toymaking and then read on....opps...
The kit & the plans seemed very good or maybe it was just the skill & workmanship of the woodworker & photographer.
Well done and thank you.
Cheers, crowie
-
22nd January 2013, 10:15 AM #7
-
22nd January 2013, 04:05 PM #8
Just found this page on Canoe making and thought it may interest you, particularly the part about the bead and cove strips they use to sheet the canoes so they get a really tight joint and then a nail/pin free surface. Most woodies could probably make strips like this up themselves so worth a look.
Untitled Document"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
22nd January 2013, 04:55 PM #9
-
22nd January 2013, 05:04 PM #10
I found this full size one.....
Murphy's canoe - by farmerdude @ LumberJocks.com ~ woodworking community
-
22nd January 2013, 07:03 PM #11Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
Thanks... The instructions were excellent, and very detailed, although I did approach a few steps differently. As well as the 40 page manual, there was also a full-size plan and templates for all the cutting. My first time building a kit, and I would rate this one as easy. As for the photography, nothing special - just a simple P&S with ambient lighting.
Similar Threads
-
Quick Canoe - "Disposable" Canoeing - very simple ply canoe - building pics
By Boatmik in forum Michael Storer Wooden Boat PlansReplies: 205Last Post: 17th December 2012, 11:54 AM -
A Canadian Bob Cat
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 28th December 2011, 11:05 PM -
Revised Canadian ...........
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 6th August 2010, 04:52 PM -
My First Canadian .............
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 27th June 2010, 09:39 AM -
Info for Quick Canoe (formally Disposable Canoe) builders - plan change.
By Boatmik in forum Michael Storer Wooden Boat PlansReplies: 8Last Post: 24th February 2010, 07:34 AM