Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 74
Thread: Model A Roadster
-
18th December 2010, 03:18 PM #1SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
Model A Roadster
I decided to make a Model A Roadster for my next major project. I will be making it primarily out of jarrah and tassie oak. It has six wheels (two spares) each wheel has sixteen spokes so they will keep me occupied for a while. I have posted a pic of the little I have done so far.
Cheers Elderly
-
18th December 2010 03:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th December 2010, 07:10 PM #2
So that's the frame Elderly or should I say Chassis Rails.
Looking forward to following you progress & photos, thank you.
Cheers, crowie
-
18th December 2010, 07:13 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
This should be interesting!!
-
18th December 2010, 11:26 PM #4
Look forward to seeing the WIP on this.
Reality is no background music.
Cheers John
-
19th December 2010, 09:18 AM #5GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Should be very interesting! Keep the pics coming
-
19th December 2010, 10:47 AM #6
Hi Elderly
Looking good.Is this the Gatto Model A?
It is a good looking model when finished.
Keep up the good work mateBack To Car Building & All The Sawdust.
-
19th December 2010, 02:54 PM #7SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
Hi Aussie,
Yes it is the Gatto Model A. The plans are pretty crappy though.Small hard to see and not to scale.
-
21st December 2010, 06:50 PM #8SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
This afternoon I started on the wheels. After marking out the tyres and rims I drilled 12mm holes through the centre of them and then rough cut them on the scroll saw. For the sake of accuracy I decided to turn then on my new, second hand mini metal lathe. After mounting on a half inch set screw I turned the outside of the tyres. Rather than needlessly get more dust on the metal lathe I moved across to my wood lathe, mounted them in the pin jaws in the scroll chuck and sanded the radius on the outside of the tyres. It was then back to the metal lathe where using a parting tool I cut the centre out of the tyres. I then cut the outside of the rims to fit into the tyres. The next job will be to drill the holes for the spokes. I will use the same method as I did for the stagecoach. The tyres are Queensland Mahogany and the spokes are Tassie Oak.
Cheers Elderly.
-
22nd December 2010, 02:14 AM #9
Keep the WIP going Elderly.My eyes lit up when I spotted you wheel progress.For some reason I have trouble with them.You may solve that .Keep it up.
GreatBack To Car Building & All The Sawdust.
-
22nd December 2010, 09:29 AM #10
Yes! keep the WIP coming Love to see the progress of your work. Spoke wheels have also always been a pet hate of mine but your method seems to be doable for me so I watch with interest. Nice work.
Reality is no background music.
Cheers John
-
22nd December 2010, 12:03 PM #11SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
Thanks for your encouragement guys.
Cheers Elderly
-
22nd December 2010, 04:37 PM #12SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
Today I drilled the holes in the rims for the spokes using the same simple jig i used for the stagecoach wheels. As i said previously it is simply a 90degree block of wood with a 12mm hole drilled in it. I then cut out the inside of the rims and decided to call it a day. I was being eaten alive by mozzies. The Aeroguard was killing me but the mozzies seemed to be thriving on it. Walked out the shed door and almost got knocked over by a swarm of locust.
Cheers Elderly
-
23rd December 2010, 08:16 AM #13Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Good stuphph Elderly!!
I plan on doing some toymaking next year and your wheel making set up has my interest!
-
23rd December 2010, 01:55 PM #14
What is the thickness of the timber you are using for the wheels and the diameter of the wheel please when completed with the tyre atttached.
I too am enjoying the WIP keep it coming.Reality is no background music.
Cheers John
-
23rd December 2010, 03:03 PM #15SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- Horsham Australia
- Age
- 81
- Posts
- 639
Hi munruben,
The finished wheel will be 10mm thick and approx 60mm dia the plans i am working from are in imperial measurments.
Cheers Elderly
Similar Threads
-
Hercus Model 0
By SurfinNev in forum THE HERCUS AREAReplies: 92Last Post: 9th February 2011, 04:37 PM -
A T Model Toy
By Ruddy in forum TOY MAKINGReplies: 14Last Post: 26th February 2009, 07:03 PM -
A model viewing
By Corunetes in forum WOODWORK PICSReplies: 2Last Post: 28th February 2007, 10:40 PM -
BMW Roadster
By Bubinga in forum WOODWORK PICSReplies: 5Last Post: 7th April 2004, 12:02 AM