Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: spoke wheel jig
-
5th July 2013, 11:16 AM #1Senior Member
- Join Date
- Jan 2012
- Location
- Gorham N.H.
- Posts
- 115
spoke wheel jig
i made a modified version of a wheel jig that someone had here on the forum it works perfect for me , i made some wheel stands to go under the wheel it helps when i drill the holes for the spokes it makes a good support for the wheel.my templates for different numbers of spoke and degree are made of 1/4 birch plywood. with this jig i can make a wheel size up to 4 inches.it mounts to the drill press table and can be adjusted for correct alignment for drilling the holes in the wheel.i can even drill the hubs on it .i have 4 lock nuts that keeps the shaft from moving from side to side these are the pictures , and a wheel i made with it today hope you enjoy2013_0107yardback0001.jpg2013_0107yardback0002.jpg2013_0107yardback0003.jpg2013_0107yardback0004.jpg2013_0107yardback0005.jpg2013_0107yardback0006.jpg2013_0107yardback0007.jpg2013_0107yardback0008.jpg2013_0107yardback0009.jpg
-
5th July 2013 11:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th July 2013, 04:00 PM #2
Thank you "hornpout" for adding another good reference tool/jig....much appreciated, cheers, crowie
-
13th July 2013, 03:13 AM #3
Similar Threads
-
TKO's Spoke wheel jig
By TKO in forum SCALE MODELLINGReplies: 28Last Post: 15th April 2017, 09:04 AM -
spoke shave
By ninpoman in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 15th December 2012, 06:33 PM -
OK GUYS Spoke wheel Jig
By AUSSIE in forum SCALE MODELLINGReplies: 15Last Post: 19th March 2012, 09:01 PM -
Jig for spoke wheels
By alex.d in forum TOY MAKINGReplies: 7Last Post: 12th April 2011, 09:00 AM -
Spoke shaves.
By ozwinner in forum HAND TOOLS - UNPOWEREDReplies: 12Last Post: 24th November 2005, 07:31 PM