No 3 with 2 coats furniture oil (as per beardy's suggestion)
Attachment 467605
Printable View
No 3 with 2 coats furniture oil (as per beardy's suggestion)
Attachment 467605
no 4 with 1 coat gloss clear (before sanding) and 2nd coat
Attachment 467707
I ****ed up no 4, sanding back finish coat :doh: (think I will stick to furniture oil)
I can repair it but, I just went on to no 5 :wink:
So far I have 2 good boards out of 5 attempts. :2tsup:
Attachment 467877
No 6 :wink:
Attachment 467929
no 7 :wink:
Attachment 468083
How about an early old style long board?
Attachment 468084
I have ordered some foam blanks to make some full size surfboards.
thanks crowie, keith and beardy for your interest in these wood models.
when I get the boards shaped I will upload some pics.
they have a wood stringer so they may qualify. :rolleyes:
cheers skeg :wink:
Now that’s getting serious!
Looking forward to the “pics”.
Look forward to seeing your work.
I shaped and made a 6 ft 2 inch round tail when I was 18 - 49 years ago - gee I am old:oo:
Regards
Keith
Here you are Peter
Me and the board I made
Attachment 469064
Sorry if I have "gatecrashed" your thread Skeghead
Regards
Keith
What have I been doing? not much, just yard work. but I have got my blanks, but that's all. (not looking forward to the dust :no:)
Attachment 471329
Hi Skeghead,
Looking forward to your next post.
I wont send a photo of me now
I had trouble with my fibreglassing when I made my board. Looking forward to seeing you doing it. Are you going to add decals and different colours ?
Be Safe
Regards
Keith