Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: April's castings...
-
18th April 2009, 05:15 AM #1Novice
- Join Date
- Sep 2008
- Location
- UK
- Posts
- 18
April's castings...
Hi all
Been having fun with resin again! Here are my latest efforts. Probably made the first one a bit too fat but it's for a tall large handed person so might be ok. It's solid pigments not mixed in properly to the resin so there are some nice swirls and also transparent bits to the blank. The second came about as having a bit left over from an earlier pour so I put it in a small mould and then tilted the mould while it set. Third one is my first attempt at a ribbon blank - pretty pleased with it. There's a front and back view of it - slimline kit for this one, polaris from timberbits for the first two.
Cheers
Stewart
-
18th April 2009 05:15 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th April 2009, 09:01 AM #2Senior Member
- Join Date
- Feb 2009
- Location
- Oxenford
- Age
- 31
- Posts
- 202
Looks good, i really like the first one, orange being my favourite colour and all
Michael
If you cant fix it with a hammer, you have an electrical problem...
-
18th April 2009, 09:56 AM #3SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Maryvale, Queensland
- Posts
- 2,338
Good job on the ribbons. I keep telling myself I should get around to doing some, just never seem to have time to go through the full process. I actually did try making some ribbons last weekend with a bit of leftover resin from another pour, but left then too long and they dried straight
Oh, this post should be in the casting & stabilisation sub-forum, too.
Russell.Pen Affair Craft Supplies - Cheapest Pearl Ex & Pemo Polymer Clay in Australia
http://craftsupplies.penaffair.com
-
18th April 2009, 10:49 AM #4
Stewart you did a swell good I like the idea about no centre band.
Russell if you use a heat gun you should be able to bend the ribbon.
David
Similar Threads
-
Next castings
By Simomatra in forum CASTING & STABILISATIONReplies: 12Last Post: 4th August 2008, 09:23 PM -
First castings
By Simomatra in forum CASTING & STABILISATIONReplies: 23Last Post: 30th July 2008, 09:13 PM