Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Casting Chipping
-
14th June 2010, 01:49 AM #1
Casting Chipping
OK you casting Guru's I need some help, I am pouring resin into a groove around the edge of a platter but when I machine it it wont cut clean it takes chips out it seem too brittle. The mix is 60 mls resin 19 drops of catalyst.(as per the info sheet) Do I need to reduce the amount of catalyst so it dosn't cure so brittle.
Thanks for any help
RippaThee who has not made a mistake, has not made anything ??
-
14th June 2010 01:49 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th June 2010, 04:33 AM #2Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
That sound like a lot of accelerator for 2 Ounces (60mls) of PR.
With the brand of PR I use they recommend 5 drops per 1 Oz. (15mls).
I use only 3 drops/Oz. to avoid the Pr from becoming too brittle.
Les
-
14th June 2010, 10:29 AM #3
Resin is naturally brittle and I have found the amount of catalyst makes little difference in bowl filling circumstances. The most important thing is to sand down the sharp edges before returning to turning with chisels, or you will catch and tear it out. I use a dremmel with a little drum sander attachment. Also ensure your chisels are razer sharp, due to the difference in hardness between timber and resin, even slightly blunt chisels will also tend to chip the resin.
Neil____________________________________________Every day presents an opportunity to learn something new
-
14th June 2010, 05:30 PM #4G'day all !Enjoy your stay !!!
-
15th June 2010, 08:30 PM #5
Thanks for the comments gents the insert is only 4mm thick and 25mm wide around the edge of the bowl. So might use less catalyst next time as I am not in a hurry for it to cure.
Cheers RippaThee who has not made a mistake, has not made anything ??
Similar Threads
-
Chipping Chisel
By woodtryer in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 15th June 2007, 02:09 PM -
Melamine chipping
By Ross W in forum WOODWORK - GENERALReplies: 12Last Post: 28th April 2006, 10:08 AM -
Help - Chipping
By Purse in forum ROUTING FORUMReplies: 5Last Post: 11th October 2005, 02:10 PM -
chipping away again
By rustypom in forum INTARSIAReplies: 4Last Post: 23rd April 2005, 12:23 PM -
Just Chipping Away
By rustypom in forum INTARSIAReplies: 0Last Post: 21st April 2005, 03:20 PM