Picture(s) thanks: 0
Results 1 to 3 of 3
-
6th May 2016, 02:54 PM #1
New to casting pen blanks.... HELP!!!!
Hi, I havent been on here much lately, been doing a Kitchen Reno and for just about all of this year, Ive been laid up with a crook back, but soon that will be fixed and after some recovery time, I can get back to living.
Swambo has expressed an interest in turning Acrylic pens, and Cabatec have the blanks for about $4.50 but I was thinking of casting my own blanks.
From the research I have done, it seams there are a few different type of resins etc being used, but I thought I should start out with the Cheapest and or easiest until I at least know enough to decide which way I want to go. I have a large well ventilated area I work in as my shed is for storage only. No room to work in there, its full of machinery.
So, What do I need & where can I buy it in Adelaide?
Thanks
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
6th May 2016 02:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th May 2016, 04:07 PM #2
Ticky rather than go through everything may I suggest you read through the Casting forum here and you will find plenty of good info on what is required and what to do.
As far as resins are concerned the easiest to start with is polyester casting resin, available in smallish quantities from Bunnings as Diggers Casting Resin, they sell the catalyst as well. You also need pigments so perhaps it would b better if you visited Adelaide Mouding and Casting who sell everything you need.
Adelaide Moulding & Casting Supplies
Timberbits sell moulds (made from silicone rubber) but you can make your own from plastic cutting board material (HDPE).
-
6th May 2016, 05:13 PM #3
Thanks for your help Fred, Much appreciated
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
Similar Threads
-
Casting Blanks
By HazzaB in forum CASTING & STABILISATIONReplies: 4Last Post: 5th August 2009, 12:19 AM -
New To Casting Blanks need help
By Dorno in forum CASTING & STABILISATIONReplies: 8Last Post: 11th May 2009, 11:30 AM -
casting blanks
By schaf in forum CASTING & STABILISATIONReplies: 24Last Post: 10th February 2009, 07:29 AM -
Casting PR blanks
By Big Shed in forum CASTING & STABILISATIONReplies: 19Last Post: 19th May 2008, 09:36 PM -
Casting Resin Blanks
By Naf in forum CASTING & STABILISATIONReplies: 39Last Post: 12th August 2006, 07:07 AM