Thread: Casting Resin Blanks

Thanks, those pics actually help a fair bit, I like the pink with the blue speck, good idea Cam.

Nathan

No probs. The pink was actually meant to be red - but I think that it must have reacted with something or other as it is definitely a very pink pink...

Hi there I am new here,

naf
have you tried waiting for the resin to start going off before pouring. It sounds like it is a bit runny

Cam
try putting your moulds on some machinery that has a low vibration to rise your air bubbles out of the resin

cheers DJ

try this.pens.jpg

i have been making handles for knives with pearls and resin for years. I have found that the best results come from just mixing the pearl and resin then add the hardner, pour on the mold and just let it set. hope that helps

Neon, do you have any pics that you can post??

Nat

try gluing the sparkles on the tube before you cast

What kind of pics do u wanna see???

Any pics to do with your castings.

Thanks
Nathan