Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 40 of 40
Thread: Casting Resin Blanks
-
6th June 2006, 02:55 PM #31
Yeah, mine bleed together too much too...
Here is a set of piccies that I have taken:
http://www.penturners.org/forum/phot...=2308&cid=2513
I have had balnks that didn't bleed at all, but they had great big air bubbles. Damn!
Cam<Insert witty remark here>
-
6th June 2006 02:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th June 2006, 11:01 PM #32
Thanks, those pics actually help a fair bit, I like the pink with the blue speck, good idea Cam.
Nathan
-
7th June 2006, 04:27 PM #33
No probs. The pink was actually meant to be red - but I think that it must have reacted with something or other as it is definitely a very pink pink...
<Insert witty remark here>
-
8th June 2006, 08:15 PM #34
Hi there I am new here,
naf
have you tried waiting for the resin to start going off before pouring. It sounds like it is a bit runny
Cam
try putting your moulds on some machinery that has a low vibration to rise your air bubbles out of the resin
cheers DJ
-
19th June 2006, 01:51 AM #35
try this.pens.jpg
-
30th June 2006, 01:18 PM #36
i have been making handles for knives with pearls and resin for years. I have found that the best results come from just mixing the pearl and resin then add the hardner, pour on the mold and just let it set. hope that helps
-
6th July 2006, 12:07 AM #37
Neon, do you have any pics that you can post??
Nat
-
9th July 2006, 11:55 AM #38
try gluing the sparkles on the tube before you cast
-
11th August 2006, 12:24 PM #39
What kind of pics do u wanna see???
Keith
[SIGPIC][/SIGPIC]
***Close Your Eyes And Visualize***
-
12th August 2006, 07:07 AM #40
Any pics to do with your castings.
Thanks
Nathan
Similar Threads
-
Casting Resin - Shelf life
By aabb in forum WOODWORK - GENERALReplies: 3Last Post: 19th March 2006, 04:20 PM -
Resin fillers - Brisbane area
By dan_tom in forum WOODWORK - GENERALReplies: 4Last Post: 22nd November 2005, 05:18 PM -
casting resin questions
By Trav in forum FINISHINGReplies: 28Last Post: 4th June 2005, 05:57 PM -
Casting resin inlay Platter
By Little Festo in forum WOODWORK PICSReplies: 4Last Post: 23rd March 2005, 08:16 PM -
Clear casting resin.
By Dennis Hill in forum FINISHINGReplies: 4Last Post: 16th July 2000, 09:35 AM