Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Casting resin colour
-
28th August 2007, 08:57 AM #1
Casting resin colour
Looking to start casting soon and looking for a supplier of the pigments and stuff for swirls Sent an email to Cardstone the importers of Alumilite but received no answer
Tested the new pressure pot last night and it seems to be holding the pressure ok
Also looking for a vacuum pump ant ideas. They have air driven ones in the US for $16 but have not found them as yet in Oz
-
28th August 2007 08:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th August 2007, 09:06 AM #2
i got my pigment colours from here
http://www.polymerclay.com.au
in search type pigment colours brings in there colours
I got resins here
http://www.armsmodelit.com.au/ArmsResins.htm
hth
Toni
-
28th August 2007, 09:31 AM #3
Thanks Toni much appreciated hopefully I will be able to see some coloured blanks soon
-
28th August 2007, 09:21 PM #4
Here's another a bit closer to home here Sam - they also deliver and have good service. Check out their metal powders too.
Edit: Oops same link as ToniNeil____________________________________________Every day presents an opportunity to learn something new
-
29th August 2007, 08:44 AM #5
Thanks Neil
Yeah that looks like the mob I will go with will ring today.
Are you using a vacuum pump and if so what type please
-
3rd September 2007, 09:05 PM #6
Sorry Sam, been away for a while.
I haven't got a vac pump yet, I'm using my paint pressure pot as is (ie pressure not vacuum) at the moment. Only problem I am having so far is actual condensation within the pot dripping on the resin, but it usually only affects the excess resin anyway.Neil____________________________________________Every day presents an opportunity to learn something new
-
4th September 2007, 08:54 AM #7
Thanks Neil
I have just tried the pot but not any resin as yet and that will have to hold as the Op is tomorrow. Its all very interesting I think I might import an air vacuum pump from the states at $59
Also playing with polymer clay
Thanks again
Similar Threads
-
Aaaah! epoxy casting resin!
By yabbyman in forum WOODWORK - GENERALReplies: 12Last Post: 12th July 2006, 08:06 AM -
Casting Resin - Shelf life
By aabb in forum WOODWORK - GENERALReplies: 3Last Post: 19th March 2006, 04:20 PM -
casting resin questions
By Trav in forum FINISHINGReplies: 28Last Post: 4th June 2005, 05:57 PM -
Casting resin inlay Platter
By Little Festo in forum WOODWORK PICSReplies: 4Last Post: 23rd March 2005, 08:16 PM -
Clear casting resin.
By Dennis Hill in forum FINISHINGReplies: 4Last Post: 16th July 2000, 09:35 AM