Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: cutting and sticking back resin
-
4th May 2020, 10:43 PM #1SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
cutting and sticking back resin
Hi there, I saw on youtube someone cut set clear resin in half on a band saw and stick it back together with just a little more resin and no sanding or anything. Does this produce a seamless fusion? Trying out new words!!!!
-
4th May 2020 10:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th May 2020, 01:00 PM #2
Depends on the resin, colour, cut finish etc but in short you will be able to see when viewed at right angles to the joint/. It then becomes how hard is it to see. If totally clear resin you will always be able to see, but with epoxies and good joint, depends on how hard you look. I've been doing dried flowers in small layers of clear and translucent coloured epoxy, as large layers tend to cook the flowers turning them brown, but I can see the joints from the side although clients couldn't unless shown
Neil____________________________________________Every day presents an opportunity to learn something new
-
9th May 2020, 06:30 PM #3SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
any pics to show Neil?
Similar Threads
-
How to get depth of resin back>?
By 44Ronin in forum FINISHINGReplies: 5Last Post: 29th March 2020, 08:40 AM -
Problem casting resin not sticking to wood!!
By KBs PensNmore in forum CASTING & STABILISATIONReplies: 5Last Post: 6th August 2014, 09:34 PM -
Anarchists cutting back on tools
By Blue-deviled in forum HAND TOOLS - UNPOWEREDReplies: 70Last Post: 27th July 2011, 07:34 PM -
Cutting down Perfect Gloss/resin finish
By ribbet in forum FINISHINGReplies: 0Last Post: 30th March 2009, 12:04 PM