Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: Die making advice needed
-
11th February 2013, 09:44 AM #16
I have made my own many times. Just use dowels and screw them down to a timber plate and build a box around them for a suitable wall thickness. I do ensure the timber is sealed, then use a release agent just before pouring silicon in, your cooking spray olive oil is fine. Make sure you build a well at the top (bottom of timber mold) though for extra resin, one issue I had with Wisson's ones, before I put a silicon bead around the top.
Neil____________________________________________Every day presents an opportunity to learn something new
-
11th February 2013 09:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th February 2013, 09:00 PM #17
Thank you all for your help.
I went to Clark Rubber and got the stoppers. I put a hole through the moulds using a large nail punch - that centered the hole. I then left the punch sticking through the hold and put a 7mm brass tube (slimline) over it and pulled the tube back through the hole. I then removed the punch and put the stopper into the tube and pushed that back through the hole. End result - stoppers sitting nicely in place through the mould. Although they are not removable, they are longer and better than the fixed silicone stoppers that come with the moulds.
Thanks again
Greg
-
18th February 2013, 09:12 PM #18
Castings came out perfectly with the clark rubber stoppers.
Thanks all
-
18th February 2013, 10:55 PM #19
All is well that ends well but where are the photos Greg ?
Cheers
Tony.
-
19th February 2013, 12:03 AM #20
Similar Threads
-
Advice on making a bench please.
By OtwayRider in forum THE WORK BENCHReplies: 8Last Post: 28th February 2011, 07:08 PM -
Help needed making a hammer with students
By Eager2learn in forum METALWORK FORUMReplies: 9Last Post: 11th November 2009, 09:30 PM -
Pen making advice...?
By Steve Walkom in forum WOODTURNING - GENERALReplies: 10Last Post: 20th May 2006, 07:12 PM -
IT advice about making CD or DVD
By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 10th March 2006, 03:16 PM -
Advice - Making this top
By dazzler in forum WOODWORK - GENERALReplies: 5Last Post: 22nd October 2005, 09:23 AM