Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Polishing a block of resin
-
14th March 2013, 06:39 PM #1
Polishing a block of resin
I have a rectangular block of fruit set in resin that I cast. I am not going to bother cutting it into blanks as I have had no success with them yet. So I thought I would polish up the block and make a pen stand out of it.
My question is - how do I go about polishing a rectangular block of resin - never done one before.
Any assistance is appreciated.
Greg
-
14th March 2013 06:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th March 2013, 06:51 PM #2SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
I'd use a buffing wheel. They move a lot faster than hands and arms.
If you don't have a mandrel/lathe system for pens, maybe you could get hold of one that is fitted with an arbor to suit an electric drill. They are pretty cheap at car accessory outlet or Trade Tools - under $20 from memory. Trade Tools even sell a set that would probably work on a pen mandrel.
-
14th March 2013, 08:11 PM #3
Not sure how rough your cast was, but basically you need to work through the sanding and polishing grits as for anything. If you have one of this sanding attachments like this: 3 Sanding Pad and some sanding discs like these: U-Beaut Polishes - SANDING DISKS plus you can also get some felt pads too that can be used to buff with EEE/polish etc. You can use the sanding pad in your lathe with some pin jaws, or just a drill.
Neil____________________________________________Every day presents an opportunity to learn something new
-
14th March 2013, 09:59 PM #4
Greg, let me try an idea I have been mulling over for the past couple of weeks out tomorrow and I may have a solution for you.
Cheers Rumnut
Similar Threads
-
Fibreglass resin vs casting resin
By BoomerangInfo in forum CASTING & STABILISATIONReplies: 15Last Post: 11th February 2019, 07:52 PM -
Polishing up the pen
By plantagenon in forum WOODTURNING - PEN TURNINGReplies: 18Last Post: 9th August 2011, 10:48 PM -
Can you use a ROS for polishing?
By Dengue in forum FINISHINGReplies: 2Last Post: 16th January 2011, 06:51 PM -
Polishing Mop
By wombatie in forum SCROLLERS FORUMReplies: 9Last Post: 28th April 2009, 05:48 PM -
A Compendium of Block Planes: The HNT Gordon Block Plane
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 16th August 2008, 09:54 PM