Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: New silicon moulds
-
28th August 2012, 12:30 PM #1
New silicon moulds
OK I have now moved to the next step, making some silicon moulds for my casting. I have made a version of a resin saver (a 4 tube sierra) and also a 20mm x 20mm x 130mm square triple mould. There a few small air bubbles in both moulds but they are insignificant enough that I am thinking they will not cause any problems. I think I can improve on the sierra mould by making the fit 2-3mm shorter but I will try a cast or two in this one before making a final decision on that.
Overall I am quite happy with the result and didn't really encounter any problems thanks to listening to the experts at the casting demo and browsing through the ensuing DVD prior to attempting it. So many thanks to those involved with the casting demo and DVD they have certainly made the learning curve so much smoother.
Cheers Rumnut
-
28th August 2012 12:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th August 2012, 12:45 PM #2
Nice work Rumnut, they should do the job well
Cheers
Tony.
-
28th August 2012, 03:14 PM #3
Hehe ! that's it .you can do the next demo well done there ,at least now if you need to you can make custom molds for even longer kits like the vertex and pencils and knights etc . Cheers ~ John
G'day all !Enjoy your stay !!!
-
28th August 2012, 10:08 PM #4
Looks good
Actually, it is better to have the Sierra ones a little large, to allow for shrinkage and trimmingNeil____________________________________________Every day presents an opportunity to learn something new
-
1st September 2012, 09:43 PM #5
Nice bit of work Certainly as good as the imported ones.
greg
Similar Threads
-
Moulds and Molds
By Scott in forum CASTING & STABILISATIONReplies: 6Last Post: 27th February 2012, 06:58 AM -
Silicone Moulds
By Dorno in forum CASTING & STABILISATIONReplies: 6Last Post: 26th August 2009, 04:43 AM -
Pen Blank Moulds
By Dorno in forum CASTING & STABILISATIONReplies: 8Last Post: 5th May 2009, 09:34 AM -
Silicon casting moulds
By BoomerangInfo in forum CASTING & STABILISATIONReplies: 22Last Post: 1st February 2009, 10:34 PM -
Getting the moulds out
By TK1 in forum BOAT BUILDING / REPAIRINGReplies: 3Last Post: 4th December 2007, 12:08 AM