Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: Test mold report
-
10th April 2009, 01:38 PM #16Newish Member
- Join Date
- Jul 2004
- Location
- Launceston, Tasmania
- Age
- 58
- Posts
- 315
Charlie,
Do you have a list of the kits you will be making the molds for.
Looking for Dayacom EB's.
Mike
-
10th April 2009 01:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th April 2009, 11:37 AM #17
I know there's a few versions of the EB, and I've never bought one.
But if that's the one that has the same size tube as the Sierra, then
I have that mold now. I'm not sure if that's Dayacom or Berea.
I've been changing them around, not quite happy with some things I was
trying to do (namely, the six pen molds) so I finally settled on a 4 pen mold.
But for the Sierra/Wall St / Elegant Beauty pens, that's really 8 pens per mold.
But you can pour them in pairs, you don't have to pour all 8 at once.
ps .. I do have a list of the molds I'll PROBABLY produce .. but it depends on
requests and volume. I'm back to having a machinist produce the masters, and
they're about $300 per pen kit. And that's before I produce any molds, so I need
to recoup that before I can move onto another pen type..
Also, the 4 pen mold fits into a flat rate envelope, so shipping is easier.
Pricing is probably going to be around $50 and will be made to order.
(It takes a day to cure, so I can only make one per day)
Similar Threads
-
Mold/fungus
By Little Festo in forum WOODTURNING - GENERALReplies: 14Last Post: 17th February 2008, 06:10 PM -
To plank or to cold mold?
By TK1 in forum BOAT BUILDING / REPAIRINGReplies: 9Last Post: 5th July 2006, 10:21 AM -
An Accident Report
By JDub in forum WOODIES JOKESReplies: 6Last Post: 19th March 2006, 09:59 PM