Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: How to Repair Click Pens
-
15th January 2015, 10:16 AM #1
How to Repair Click Pens
These are made using what I think is the P9 kit....they are a Click Mechanism and I have used 7mm tubes. For some reason the mechanism will not work properly. can anyone assist me in repairing them: I make the following observations;
1...I am not sure whether the overall length is critical [no instructions]
2...I have checked that the smaller 'end' of the spring is at the tip end.
3....tried several spare refills.
Regards...George
Repair P9 Click Pens #4.jpg
-
15th January 2015 10:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th January 2015, 08:10 AM #2
I am guessing these use a "cross" type refill, check that the refill fits through the nib end as sometimes the small hole closes slightly when being pressed into the tube simply ream it out so the refill fits (approx 2.5 mm drill ) Length of tubes is critical ,but shorter tubes will simply mean the refill pokes out a bit more than expected, and sometimes won't retract completely leaving the refill exposed , refill can have a small amount cut off the end to compensate, but it means future refills will need the same treatment cheers ~John
G'day all !Enjoy your stay !!!
Similar Threads
-
One repair 2 new bullet pens
By gawdelpus in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 7th August 2012, 10:51 PM -
New GPW Click pens !
By Pariss in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 27th July 2012, 10:14 PM -
My First Click
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 2Last Post: 31st March 2011, 03:37 PM -
Click Action Pens
By HazzaB in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 31st March 2009, 07:52 PM -
Help with 'Click' Pens
By WoodWriteOz in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 28th September 2008, 04:56 PM