Page 1 of 2 12 LastLast
Results 1 to 15 of 29

Thread: CA glue finish

  1. #1
    Join Date
    Aug 2017
    Location
    Canberra
    Posts
    585

    Default CA glue finish

    I see a CA glue finish is popular amongst pen turners. Is there something else as durable though?
    I find I get a much nicer richer finish from a carnuaba wax finish but will this last?
    CA glue starts nice for me then the more I apply the duller it gets especially once an accelerator is used.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2011
    Location
    Langwarrin
    Age
    43
    Posts
    952

    Default

    Hey mate,
    I have seen a few blokes use 'rustins plastic coating' as a finish (sawdust maker and mkypenturner from memory) and they swear by it. I haven't used it but have bought some to try one day.

    What ca are you using? Generally speaking, a good quality CA (not the $2 packs) and a hint of accelerator come up a treat with a little practise. Do you micromesh or polish after you have applied your CA?
    I recommend Dave from timberbits' video on CA finish (YouTube). It is the method I started with and have only modified slightly over the years.

    If you're getting a full effect after using accelerator, I may suggest you could be using to much. I only spray a split second after each coat, and then give it 30 sec to cure.
    I use mercury flex ca (perfect pens and pencils) these days and get great results.

    Hope these hints from my experience help - happy to keep answering questions if I can...

    Cheers
    Gab
    "All the gear and no idea"

  4. #3
    Join Date
    Aug 2017
    Location
    Canberra
    Posts
    585

    Default

    I definitely use a cheaper CA glue, Hobby KIng home brand sort of thing.
    I do try to use very little accelerator but I'm sure its still too much.
    I don't micromesh ca but I do sometimes use that plastic polish.

    I think i'll upgrade my ca and give that mercury a go and the accelerator.
    Thats another thing I dont do is wait that 30 seconds, probably half that!

    I'm going to watch that youtube clip!!

    Thanks heaps

  5. #4
    Join Date
    Apr 2006
    Location
    near Mackay
    Age
    59
    Posts
    4,628

    Default

    When I first started using CA, I had a lot of trouble getting it right.
    I wont mention brands here, except what I am using now.
    I tried various brands and for a while settled on one from one of the pen kit suppliers, I could get a decent finish if there was no humidity in the air. As a result, I did nearly all my wooden pens in the cooler months, as you can imagine that’s not real practical when you are selling pens.
    After some research, I started using Bob Smith Industries “Gold “ , the thin one works best for me. The added benefit is its odourless, with this stuff I can use it all year round, even when there’s water dripping off the shed walls. This stuff is relatively expensive compared to other brands, but worth every cent to me.
    I use my activator differently to most. I use a Loctite spraycan 7471.
    I use craft foam sheet for an applicator, cut into about 18mm wide strips, this stuff is good because it doesn’t soak up any of the valuable CA, it all goes on the pen.
    The first coat, I put 2 drops on the end of the foam strip, wipe it back and forth on the blank to get a full coverage and smooth it out , lathe speed is around 150 rpm. With a bit of practice you get a feel for when the CA starts to go off, there is a slight increase in the drag on the foam strip. Stop now, or the finish will go rough.
    I wait about a minute for the CA to harden enough, now I turn the lathe back on, give the blank a quick spray with activator, like a one second burst from about 400mm away, I have the extractor going at all times. Quickly get the foam with 2 more drops on it and repeat , get ready for the drag on the foam, it’s important to stop then or you will get a rough finish. I repeat the coats with the same procedure until I have enough thickness, measured with calipers, I aim for 0.1mm oversize. This usually takes me about 8 coats.
    So as you see, my process differs, in that I am not activating the coat that I have just applied, I am using the activator to set off the coat I am about to apply.

    When this is working correctly, I get a very slight orange peel finish, it’s just enough to make the finish look a bit dull. I use 400 wet an dry paper to take the finish down flat and almost the finished size I want, then I quickly go up with a few higher grits to 1500 wet and dry, then onto the buff, results in a beautiful crystal clear glossy finish.
    Forgot to mention, after my final coat, I let it sit for 24 hours, or more if you can wait, before sanding and polishing. The Ca gets harder when properly cured and you get a better shine, and any deeper sections of CA have had time to cure properly, prevents those little sunken spots from appearing in your finish after a few days where the CA was a bit thicker.
    Takes me at least 2 days to do a CA finish, but the results are worth it.
    Everyone has a different way to do CA, but this way works for me and I get good results every time.
    ​Brad.

  6. #5
    Join Date
    Aug 2017
    Location
    Canberra
    Posts
    585

    Default

    Gab, just ordered some of that mercury flex, looking forward to giving it a go!

  7. #6
    Join Date
    Aug 2017
    Location
    Canberra
    Posts
    585

    Default

    and its just arrived in the post

  8. #7
    Join Date
    Oct 2011
    Location
    Langwarrin
    Age
    43
    Posts
    952

    Default

    Sorry.... I missed this thread for a bit...

    That's great news and I hope you have as much success with it that I do
    "All the gear and no idea"

  9. #8
    Join Date
    Apr 2020
    Location
    Seaford, Vic
    Posts
    397

    Default

    Adding to an old thread rather than starting a new one. When using CA glue to finish a pen - do you apply an oil stain to the timber first or just CA glue straight onto the bare timber?

  10. #9
    Join Date
    Apr 2006
    Location
    near Mackay
    Age
    59
    Posts
    4,628

    Default

    In my opinion, CA should go onto bare wood. I have heard of some using boiled linseed oil first, but I don’t think it’s a good thing.
    There are people putting dyes on the timber, but I think you’ll find most people prefer to see natural timber.
    In Australia we have enough variety of beautiful timbers that I don’t think you need to change the looks of any, just choose a different timber to suit the look you are after.
    ​Brad.

  11. #10
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    5,124

    Default

    I wrote this a little time back - it still follows my thoughts.

    ca glue as a high finish on pens


    People over think it. Its really simple.

    I've done many pens. Not one failure.

    After all the years they are still good.

  12. #11
    Join Date
    Apr 2020
    Location
    Seaford, Vic
    Posts
    397

    Default

    Quote Originally Posted by woodPixel View Post
    I wrote this a little time back - it still follows my thoughts.

    ca glue as a high finish on pens


    People over think it. Its really simple.

    I've done many pens. Not one failure.

    After all the years they are still good.
    Cheers for that - simple is good!

    Where do you recommend getting BSI and Hafale glues?

  13. #12
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    5,124

    Default

    BSI is sold at most modelling shops, especially those that do aircraft. It seems to be a favourite.

    Hafele I buy direct, simply as I've an account there. They are an outstanding company.

    The BSI is an excellent glue. A big bottle will do a zillion pens

  14. #13
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    1,489

    Default

    Quote Originally Posted by RSD View Post
    Cheers for that - simple is good!

    Where do you recommend getting BSI and Hafale glues?
    Bob Smith Industries glues can be bought from Amazon. Hafele have an online presence in Australia with local fulfilment. I assume they sell to retail customers. I've never tried.

    Has anyone tried the Fastcap brands for a CA finish?

  15. #14
    Join Date
    Apr 2020
    Location
    Seaford, Vic
    Posts
    397

    Default

    I've been able to get the CA glues, but not any accelorator (Amazon was out of stock). Any thoughts on how long to leave it between coats if not using the accelorator?

  16. #15
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    5,124

    Default

    There is a video by Timberbits where he used steam to do the job. I'll find it and post it here.

    As for accelerator, the one by Hafele is called Aktivator.

    https://www.hafele.com.au/en/products/tools-consumables/sealants-adhesives/adhesives/673a48fd66215bb2af1741d6e80ce452/


    Try a search for 2P-10 or this stuff https://www.timbecon.com.au/fastcap-2p-10-glue-activator and/or https://swiftsupplies.com.au/weicon-contact-adhesive-activator-spray-150ml-cans

    Its all pretty much the same stuff.




Page 1 of 2 12 LastLast

Similar Threads

  1. ca glue as a high finish on pens
    By moodg in forum WOODTURNING - PEN TURNING
    Replies: 14
    Last Post: 19th August 2017, 06:52 PM
  2. Jarrah Kitchen Benches - What glue to use ? and What oil finish
    By swiftden in forum WOODWORK - GENERAL
    Replies: 37
    Last Post: 26th November 2016, 07:59 PM
  3. Glue And Finish Greasy Sticky Softwood
    By Paul39 in forum WOODTURNING - GENERAL
    Replies: 2
    Last Post: 19th March 2016, 09:02 PM
  4. Outdoor table, best finish and best way to glue up the top?
    By StevenManos in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 27th July 2014, 04:47 PM
  5. Finish before glue up?
    By LineLefty in forum GLUE
    Replies: 7
    Last Post: 4th April 2005, 05:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •