Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: My Work Bench
-
19th April 2004, 09:25 PM #1
My Work Bench
I thought I would post a pic of my workbench that I built.
Nothing fancy and very cheap. I built it out of material that I had around the place.
The frame is just built out of radiata 90mm x 35mm glued and bolted together with hex head coach screws. I first of all just put a sheet of 1800mm x 1200mm MDF on top of the frame and put an edge around the MDF out of Radiata.
I then decided to build up each side of the top with 5 lengths of 90mm x 35mm Radiata to create a well in the centre. I then mounted an el cheapo vice onto it.
Certainly nothing fancy but practical and meets my needs.
Notice the chain hanging at the end of the bench. I use them to lift the bench up with a couple of endless chains so I can get the cars into the garage.
-
19th April 2004 09:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th April 2004, 01:22 AM #2
Thats a novel solution to space shortage. Have an elephant stamp and go home five minutes early.
-
20th April 2004, 05:42 PM #3Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Barry,
I like your bench, it is a decent size and you would not be afraid to do some serious work and worry about damaging it.
I also think your method of moving it out of the way is a very clever idea.
Peter.