Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
17th May 2023, 05:17 PM #1New Member
- Join Date
- Feb 2023
- Location
- NSW
- Posts
- 1
Feedbacks/ survey for workbench design
Hello All,
I am currently constructing a workbench for my HSC. I’d appreciate any responses regarding finish and what your find is important with the design of a workbench.
The form is anonymous and emails are not collected. Workbench project research
The main frame will be constructed with tassie oak with the top and rest of the table made of 3/4” birch ply. I will have T-tracks, built in power board, NVR emergency paddle switch, a hitch receiver and side mounted castors.
Appreciate your response,
Adam
Sent from my iPhone using Tapatalk
-
17th May 2023 05:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th May 2023, 11:18 PM #2GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,135
-
19th May 2023, 10:26 AM #3Senior Member
- Join Date
- Aug 2014
- Location
- Geelong, Victoria
- Posts
- 284
Good luck with the project - just remember that this is your 'first' bench. I have built three for myself and another three for other people, just since I retired. And that is not allowing for the extreme modifications needed when I moved into a workshop 30% of the former size - I had to hack off 250 mm to get it into the space and still allow room for a little lathe.
I think it might be wise to focus on what will get you a good HSC result as your first priority. No doubt your survey is part of that (yes I have put in a response). The hard thing about a workbench is that your requirements change over time - as you learn, adapt and take on new projects. I am in the camp that a workbench is a tool not a piece of show furniture. Practicality and adaptability are key.
As a mainly hand tool woodworker (apart from a mild woodturning obsession), I don't think my ideal bench now would be that different to one my Great-grandfather would have used 100 years ago. But that is a very personal thing.
Good luck and enjoy the process. I think if you enjoy it, you will get good marks!
-
19th May 2023, 12:21 PM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
Unless the bench is to be used in a "forever shed" then making the bench to a size that will allow to be moved thru a standard doorway has some merit.
An alternative is to make at least some parts of the bench so's they can be taken apart and reassembled.
Same goes for weight - ie moving a 200+ kg bench around is no fun so wheels or being able to take it apart.
Similar Threads
-
Workbench design any critique?
By dcarbonetti in forum THE WORK BENCHReplies: 5Last Post: 31st October 2015, 11:20 AM -
Design & Technology GCSE research survey
By JizzaDaMan in forum WOODWORK - GENERALReplies: 0Last Post: 16th August 2012, 12:49 AM -
Workbench design
By snafuspyramid in forum THE WORK BENCHReplies: 18Last Post: 28th June 2011, 10:30 AM -
Workbench design
By Wizened of Oz in forum THE WORK BENCHReplies: 1Last Post: 8th May 2011, 08:44 PM