Here are some pictures of things I have made at the bench.
The tail vice has been a very important part of being able to do this sort of work. Once you get one you would never want to be without it.
There are 4 benches in the work shop all with a face and tail vice. Three of the benches we built and one is old .
A walnut leg being carved, I'm not a good carver but get by when I cant find someone to do it. I had to do 12 of these for a chair and foot stool set.
A bit of drawer construction. Hoop Pine with Mahogany facing.
The Red Cedar and Casuarina Wellington chest I made to hold the last 34 years worth of scale drawings, it's ten graduated drawers keep the drawings in order and sits next to my drawing board in the office area. A Wellington chest locks all the drawers with one key being turned locking the right column.
My first and only, so far, Guitar , 9 months after hours work .The Guitar is sitting in a jig which locates in to the dog holes, I had it set up like this to cut the dovetail for the neck.
A pair of Mahogany chests and a wing chair.
A Cherry extension Table with six leaves and eight legs.
Thanks again for all the very nice comments guys.:2tsup:
Rob