Needs Pictures: 0
Results 31 to 40 of 40
-
7th April 2018, 08:18 AM #31
As you can see mine has plenty of battle scares and yes it is normally this clear but that is aminly due to the fact that I have to take photo's of the build for magazine articles so need to keep the clutter down as well as that it is only small and if not kept reasonably clear I tend to loose things
During a build
DSCF9283 (800x600).jpgDSCF9367 (600x800).jpgDSCF9475 (800x600).jpg
These give an idea of the size and shows the battle scares
DSCF9525 (800x600).jpgDSCF9529 (800x563).jpg
-
7th April 2018 08:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd May 2018, 06:31 AM #32
-
4th May 2018, 04:19 PM #33Senior Member
- Join Date
- Jul 2015
- Location
- Melbourne
- Posts
- 103
That's not a work bench, it is a piece of art!
-
4th May 2018, 04:29 PM #34Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,126
Looking rather clean today
IMAG2882.jpg
-
5th May 2018, 11:45 AM #35
I gave it a tidy up and put all the bits and pieces where they belong and it now looks like this
20180505_103907[1].jpgThose were the droids I was looking for.
https://autoblastgates.com.au
-
8th May 2018, 01:18 PM #36
Archer
That's a neat and tidy little bench there.
Well done
Cheers Matt
Sent from my iPhone using Tapatalk
-
10th May 2018, 01:46 PM #37
At the moment I am building a cigar box guitar for a friend. I do clean up the bench now and then when the clutter starts slowing the work down. I've built quite a few of these now and found that actual cigar boxes can be hit or miss sound wise so now mostly build the box myself unless the client wants an actual cigar box. Am at the first test fit of the neck blank. About half ways through the build. So this is how my bench currently looks.
Regards
John
-
13th May 2018, 05:30 PM #38
I am preparing to move to a new shed early next month and was caught in the middle of a workbench build. It currently looks like this.
20180513_161733.jpg
The base is complete, a lot of the top is done but still got to cut and fit end-caps, tool-tray and vises. The redgum on top of the ironbark top are the endcaps.
The build thread is here Long-overdue workbench build if you want to follow along. I will be back to working on it sometime in June after I have moved into the new shed.I'm doing my May Challenge - I may or may not give a #*c&
-
13th September 2018, 08:44 PM #39New Member
- Join Date
- Sep 2018
- Location
- Australia
- Posts
- 3
-
14th September 2018, 06:32 PM #40
Thanks Spandex, it's got a HNT tail vice on it now too which is brilliant.
Tail 5.jpg
I'm going to add some Veritas Prairie Dogs to the two dog holes over the vice when I get to Carbatec.Those were the droids I was looking for.
https://autoblastgates.com.au
Similar Threads
-
Air Tool Operation
By Oldneweng in forum METALWORK FORUMReplies: 14Last Post: 5th August 2013, 08:33 PM -
Slitting Saw Operation
By electrosteam in forum METALWORK FORUMReplies: 16Last Post: 12th January 2010, 10:23 AM -
Allan's Operation
By Barry Hicks in forum WOODIES JOKESReplies: 0Last Post: 7th June 2008, 02:44 PM