Thanks: 0
Needs Pictures: 0
Results 1 to 7 of 7
Thread: My outdoor workbench
-
11th April 2020, 09:35 PM #1
My outdoor workbench
Last year I commenced a series of projects that would enable me to use the area under the carport as a workshop and allow SWMBO to finally park her car in the garage/shed. All my machines and stands are mounted on wheels so they can be stored in the shed normally and wheeled out to the carport to be used. Now what I needed was a half decent workbench...A few years ago I had constructed a timber storage rack from blue MGP10 with an old kitchen worktop, it didn’t see a lot of use other than timber storage and a convenient horizontal surface to pile stuff on. In the shed reorganisation it needed to be moved outside and I decided to use it as the basis for the new bench.
35EEDCAF-D3E1-43EA-8250-3475AC5DB400.jpg AEBE25AD-3C3E-4E12-983B-2434F3CE6101.jpg
Now; there is a common perception that your current workbench is merely a stepping stone to your next. With that in mind I decided to build this with wishlist features that may or may not make it onto the next bench but within the limitations of what I have to work with. A pair of bench vises from Timbecon are used to replicate the leg and tail vise that can’t be fitted as the top is too thin and it doesn’t have solid legs. In order to fit my Disston saw vise and my Ozzy Vise the top has to overhang the frame by 35mm which means I can’t easily fit a traveller, so for supporting long boards I fitted a row of 1” pegs that pull out like organ stops.
AE7D97BE-6FBC-46F2-8A3E-FCB1216E139A.jpg 95B32DD4-0AF8-498F-A116-64CB73BF7EEF.jpg 99723FC7-DC52-406F-B38B-21E92F29A6A3.jpg
Talking of the Ozzy Vise (and all its permutations and namesakes); many people deride this little tool but I found it a lifesaver when my lathe crapped its belt leaving me with no way to turn the vise handles... until I remembered the centre holding attachments. One block plane, a curved spokeshave and a bit of 40 grit sanding belt later I have a pair of useable handles.
7995CDBC-DBE7-4C7A-9512-12B0AE579142.jpg
The top was made from pine sleepers and because they were slightly too narrow to span the whole top and still give me the required overhang I fitted a reversible strip a third of the way from the back edge. It’s notched to fit over the frame rails and lifting it out and turning it around gives me a 3/4” high backstop. I didn’t actually intend the bench to have this but as I had to fit a bit of a filler piece and I’ve seen similar stops fitted to other benches I thought I’d incorporate one.
F73FA8E8-3F8E-4491-802A-85FCCFA9F75B.jpg
The front vise has provision for a pair of dog holes that I haven’t yet drilled, there is also room behind the backstop for another pair of holes. At this time I don’t know if I will use the backstop but the ability is there; it only takes a few minutes to drill the extra holes if I find the need.
Ok; there was no real planning or design for this bench. Most of it was done on the fly and a critical look will spot a few errors that would have been avoided working from a plan. Additionally there are compromises that were dictated by my choice of material and construction such as the front row of dog holes being 6” from the front edge rather than the normal 2-3. But it will replicate most of the features I think I want on my next one .
Oh, and I managed to keep the sheet goods storage at the back which was its original purpose!Nothing succeeds like a budgie without a beak.
-
11th April 2020 09:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th April 2020, 08:35 PM #2
Found a use for the backstop!
Today was spent designing a new compact stand for my mini lathe, this is the base where casters will be mounted. I forgot to mention that under 3 of the dog holes are Irwin hold down jigs that allow me to quickly mount some Quick Grip clamps as hold-downs. The workpiece is butted up against a pair of dogs and then clamped down so the biscuit jointer can be used on the mitres.
6D66CE28-485B-4219-BB31-5B9BBD4A4E8D.jpg 9C901EFB-F622-4F97-94C2-B5DC61676BF6.jpg
When the time came to clamp up the assembly rather than pull out pairs of sash and pipe clamps I thought I’d see if the end vise could be used in conjunction with the double row of dog holes. Then I realised that the don’t-know-what-I-will-use-it-for-yet backstop was pretty well placed to assist with keeping everything square.
FB5DADAA-6F74-4581-A177-71E132537BD1.jpg
So... the frame is clamped in two directions, longitudinally by the end vise and dogs; and athwartships by two sash cramps which also clamp to the backstop. A little easier to adjust and true up than with four separate clamps! Just needed a couple of shims on one dog to get it perfectly squared up.
Starting to look like the backstop may end up being a desirable feature after all!Nothing succeeds like a budgie without a beak.
-
10th May 2020, 10:38 AM #3
Lathe stand with a difference
Although this is a continuation of my outdoor work area build I didn’t think this really belonged in the workbench forum so here is a link
Nothing succeeds like a budgie without a beak.
-
14th May 2020, 08:36 PM #4
I like the pop-in-up rail. Its a good idea. I'll steal that
-
14th May 2020, 08:51 PM #5
-
14th May 2020, 09:07 PM #6
reminds me of this classic....
d77222df469b50e3b4cdcc1f6dc74219.jpg
-
14th May 2020, 11:35 PM #7
That pop up rail is common place on the split top Roubo benches and a very useful feature too.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
Similar Threads
-
The Outdoor Workbench
By pmcgee in forum THE WORK BENCHReplies: 258Last Post: 11th February 2017, 01:53 AM -
The *Real* Outdoor Workbench
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 1Last Post: 14th May 2013, 11:58 AM -
Advice for outdoor workbench
By Robot in forum THE WORK BENCHReplies: 25Last Post: 23rd June 2012, 05:23 PM -
Best metal finish for outdoor workbench
By Dengue in forum THE WORK BENCHReplies: 10Last Post: 13th May 2009, 02:20 PM -
intro myselft and outdoor workbench
By nukang in forum THE WORK BENCHReplies: 6Last Post: 11th February 2007, 03:20 PM