Needs Pictures: 0
Results 1 to 2 of 2
Thread: Some leg vise accessories
-
3rd January 2017, 03:21 AM #1
Some leg vise accessories
Three accessories for those with a leg vise ...
I posted recently about the kitchen doors I am building ... 22 in all. They are all in Hard Maple, from rough sawn timber imported from the USA. As mentioned previously as well, all Shaker style to replace doors with raised panels from the existing kitchen built 20 plus years ago.
I've now completed 12 of the doors, and am in the process of assembling the rest ...
As I was clamping yet another frame to side of the bench, I decided that I had enough of fiddling with this process, and decided to modify my leg vise to make it more friendly. The problem was that the section of the bench facing the chop was lined in leather for added grip. This lifted the work away from the side of the bench, and, when clamped in the vise, the frame would rack. I had got by through shimming the gap. Of course, if I adjusted the frame, the bloody shim dropped out, and I would have to start all over again!
The first accessory was easy enough ... a shim that would not fall off the bench ...
The shim is the same thickness as the leather ...
Next ...
One of the big advantages of a leg vise is that one can clamp a door down one side. The problem is that the vise racks. Over time the vise will damaged. More immediately, it does not hold as firmly as when the full width of the face is used. The time honoured method for dealing with this is to have a deck of wooden cards that may be dropped in the opposing end. Something like this version, which is sold by Lee Valley ...
I did not want something that would be lying around. I have enough bits and bobs lying around already. Even the shim (above) is another item to lie around, and I shall have to come up with a better idea to replace it.
Well, I came up with an idea for the vise which I have not seen before, so it may just be original (I doubt that, but it is nice to imagine). This a simple depth stop for the outside of the chop.
This was built from Jarrah scrap. I found a thread that I could mortice into the wood. The hole for the thread was drilled with a brace and bit.
It was hard going. The bit was sharp and the threads were clean and designed for hardwood. But they were not going anywhere, even with much downforce. I recalled a tip that Salko had posted here (and, indeed, had won a prize from Pop Wood magazine). It involved how to use a forstner bit with a brace. To do so, he drilled a pilot hole:
https://www.youtube.com/watch?v=j_un...ature=youtu.be
It occurred to me that this may work with the bit as well ...
Did it ever ..!
So here is the depth stop ..
Finally, all could be used together, and attaching and holding frames became a breeze ...
The third accessory? Well, have you not wanted to use the leg vise like an end vise, that is, to clamp boards across the bench? Like this ...
Obviously, on the bench are dogs like these ...
These are from Lee Valley. I cover the faces in leather to prevent marring sides (I do the same will all hold downs).
The other side is the leg vise chop, and that, too, has a dog sunk into it ..
These are also from LV, the "prairie dogs", which are spring loaded ..
When no longer needed, they are pushed into the chop and out of the way. Pop them up again when you choose ...
Lots of fun, but all useful.
Now, how do I build the shim into the bench?
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
3rd January 2017 03:21 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd January 2017, 11:39 AM #2GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
You could aways just glue some leather on the face of the bench where the shim goes.
I doubt it would get in the way and would always be there when needed.
Similar Threads
-
Record QR Bench Vise as a Tail Vise...which size?
By seanz in forum THE WORK BENCHReplies: 2Last Post: 12th September 2013, 06:47 PM -
BENCH VISE and TAIL VISE
By FenceFurniture in forum THE WORK BENCHReplies: 0Last Post: 29th April 2012, 11:13 AM -
Jig accessories
By Big Shed in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 2Last Post: 6th June 2007, 09:18 PM -
Accessories for the MC 900 ?
By Hank in forum WOODTURNING - GENERALReplies: 10Last Post: 7th October 2004, 06:25 PM -
Elu Accessories
By Marty Lott in forum WOODTURNING - GENERALReplies: 5Last Post: 3rd November 2003, 08:30 AM