Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Is a Triton Workbench for Me?
-
12th July 2000, 06:22 PM #1New Member
- Join Date
- Jun 2000
- Location
- Yangan
- Posts
- 7
Is a Triton Workbench for Me?
I am new to woodwork and have been getting along with hand tools and a router. Now I would like to rip to size some hardwood I have to use for some projects. Will the Triton workbench easily cut square ready to join surfaces? What should I buy in terms of accessories and a power saw? What are some pitfalls to avoid? Any other advice?
Stephen Reid
-
12th July 2000 06:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th July 2000, 06:47 PM #2Intermediate Member
- Join Date
- Jun 1999
- Location
- Melbourne Australia
- Posts
- 37
Have a read of the previous postings, especially Triton Newbie - Angelo - Feb 5 2000.
-
13th July 2000, 10:27 AM #3New Member
- Join Date
- Jun 2000
- Location
- Yangan
- Posts
- 7
Thanks Noel. I have now taken the opportunity to look over all the Triton chatter. I must say it is a most informative forum. Triton certainly have their best salesmen working freelance. I now just need to shop around for a 2000 and Triton saw at a good price. Is it safe to purchase them second hand, i.e, do they suffer from abuse easily?
Stephen Reid
-
14th July 2000, 05:54 PM #4Intermediate Member
- Join Date
- Jun 1999
- Location
- Melbourne Australia
- Posts
- 37
Is it safe to buy second-hand? Probably. Like many things it will depend on the individual items. I wouldn't buy the Mark 3 version in preference to the 2000. I have used both and the 2000 is MUCH MUCH better.
Wherever you acquire one plan to spend a few hours setting it up. If you are patient you will be able to set it up properly and then obtain excellent results. There have been many comments in various forums that the Tritons are not accurate. If not set up properly that may be true. I check mine every couple of months or if I have to do something that requires great accuracy. As I say, be patient, set it up properly and it should give you great results.
-
15th July 2000, 06:30 PM #5
I have also been considering the purchase of a Triton. This talk of "the importance of correct set-up" is a bit daunting. Is it dificult? Do you need specialist help? or can the average duffer like me do it by following the " simple instructions" provided?
John H.Jack the Lad.
-
16th July 2000, 12:01 AM #6Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Gooday.
John, can you use a square and a tape measure?
If so, no probs.
A spirit level is handy too.
I used to have a Triton bench that was more accurate than my mates table saw.
------------------
Ian () Robertson
"We do good turns every day"
-
16th July 2000, 12:15 AM #7
Hey (Mr nigh on redundant)
Is that the mate with the 8" B&D sticking up through the kitchen table or the one with the jig saw set into the chipboard coffee table.
NeilKEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
16th July 2000, 06:05 PM #8New Member
- Join Date
- Jun 2000
- Location
- Yangan
- Posts
- 7
Noel, John,
Thanks for your advice. Are the videos worth the buy in that they are of lasting support or do they just help you get things right in the beginning? Thanks esspecially to Noel for his email on some tips for ripping with the Triton bench and 2000 vs MK3. From all advice it appears that I would be best to get the 2000 + dust bag and dust collector + videos. Any other pointers?Stephen Reid
-
16th July 2000, 08:45 PM #9
G'day,If, as you say you are considering getting yourself a Triton Workbench then the video is or would be considered a good tool for your reference from time to time.
Have you checked the WWW for a search on the sawbench that may also aid in your queries?Many years ago when first starting into the woodwork field I bought one of the very early models and I found the video helpful even up until the time when I sold the unit a couple of years later.The Workbench from my experience holds it's value and is as accurate as you yourself are, in your approach, to all the tools at your disposal.
I have heard many compliments for this Sawbench and very few negative views but primarily from those who may not approach the tool with the right perspective in mind!
Good luck and Cheers from a wet windy West Oz
------------------
JohnnoJohnno
Everyone has a photographic memory, some just don't have film.
-
17th July 2000, 05:37 PM #10Intermediate Member
- Join Date
- Jun 1999
- Location
- Melbourne Australia
- Posts
- 37
's response as to whether the setup is a daunting process is spot on ........ although I dont quite trust my tape measure that much. I use a steel ruler for checking the scales on the Triton.
As I mentioned above just take your time and all will be well.
-
25th July 2000, 10:02 PM #11
I own Triton 2000 it is excellent for most jobs ,the sliding table extension is a great addition to any triton 2000 just as in all the other replies check all is square on a regular basis .The new saw base plus the addition of new depth adjustment jig makes it a very diverse and easy to use tool .Also has anybody used the new planer attachment yet?
------------------
Constant Sinking Feeling
-
27th July 2000, 09:22 AM #12
What specifically is a Triton? I can't determine from the posts if it is an actual "workbench" or a "combination" tool group like the Shopsmith we have in the U.S.
Really enjoy reading this BB, but need a little "enlightening" with regards to some terms.... bear with me.....
Thanks, Phyllis
-
27th July 2000, 11:18 AM #13Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 47
- Posts
- 1,260
Phyllis,
firstly, Welcome from Oz! I hope you enjoy the B.B. And remember, we Aussies are always a day in front of you
The Triton system is basically a home handyman bench saw system that can be converted with different attachments to preform different functions.
Its popularity is its price, It is a affordable for the homehandy man and is accurate once setup ( that goes without saying though )
But check out there home web page and that might help you out more than words can
www.triton.net.au
HTH
Cheers
Shane!!
-
28th July 2000, 06:29 AM #14
Thanks, Shane, will check it out.
Also, I am becoming a frequent visitor to your BB... great fun....
Always wanted to visit Australia, so for now this is next best...
Regards, Phyllis
-
8th August 2000, 11:39 PM #15
I have had a Triton for many years now and still have the first one I bought, MK111.
I found the 2000 easier to set up than the old one , my faithful old mk111 is now a permanent router bench, still on the temporary wooden stand I knocked together 12-13 years ago.needless to say I wouldn't part with either of them.
I have a makita 91/4" saw but if it ever wears out I woild probably buy a Triton saw if only for the infinate fine adjustment (height)on it.
I have used my old one for cutting steel /timber /pipe. its a good friend to have in the shop.
enjoy.
Taffy
Remember if ther were no Mondays there would be no weekends.
(I'm retired now so to hell with mondays)