Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 139
Thread: WIP - Recycled Hardwood Bench
-
13th February 2011, 10:20 PM #1
WIP - Recycled Hardwood Bench
I've been watching Dan's, Groggy's and Kman's bench builds and decided it was time i stopped procrastinating and got stuck in. I'd been collecting bits of hardwood for a while with the intention of making a bench but hadn't really found much worth keeping when my BIL rang and said he was demolishing a house and did i want any hardwood. YES PLEASE.
After a morning scavenging through the mountains of timber I came home with a trailer load of fairly rough sawn, extremely well seasoned hardwood. I didn't see the house standing so have no idea how old it was but all the wall studs were M&T'd into the top and bottom plates. You can see some of the tennons in the first photo. They don't build 'em like that any more.
I spent a couple of days checking each bit of wood for nails and lucky i did because i found a couple as you can see in the second photo.Those were the droids I was looking for.
https://autoblastgates.com.au
-
13th February 2011 10:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th February 2011, 10:32 PM #2
Thanks to the baby sitting powers of the MIL I managed to get a couple of days in the shed.
The legs were machined and cut to length, with a bit to spare. I'm sort of making this up as I go along.
I then cut and machined the bits for the top. As you can see from the second photo the timber is a bit of a mixed bag but I quite like the varied look once it's all put together.
I drilled the dog holes (last photo) and then glued the top in three sections. I'll run each section through the thicknesser before I do the final glue up. If i can handle the sections by myself.
Although not quite on the scale of Groggy's bench, it's still pretty heavy. I'm guestimating the top at about 100kg.
If they're too heavy for my little Ryobi thicknesser I'll flatten the top with handplanes. That will be ...interesting.Those were the droids I was looking for.
https://autoblastgates.com.au
-
13th February 2011, 11:05 PM #3
Nice score on the 'extremely well-seasoned' timber It's looking a real treat already
Box Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
13th February 2011, 11:12 PM #4
This is all getting a bit close to home, as you say Dan has one, now you, all on my doorstep I feel I may have to shortly trade up from my sheet of plywood with legs to one of these fancy benches.
I won't rush into it though. Great job Tony, looking good.
-
13th February 2011, 11:34 PM #5
Looking good. What a job on all those nails. Actually like the multi-colour look.
Keep us up to date.
Cheers
Pops
-
14th February 2011, 09:47 AM #6
Oh what fun
another bench build
Think I'll take a seat and watch
The different coloured timbers look greatregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
14th February 2011, 11:20 AM #7GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Always love to watch a bench build.Nice collection of timber at the right price. Looking good.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
14th February 2011, 11:25 AM #8
Thanks for the comments everyone.
Go on Claw, do it. I've still got heaps of timber
I forgot to mention that the bench is fully protected from evil influences as blood has been spilt.
I was taking all the clamps out of their storage in preparation for glue up and I hooked them over the rafter....yes you can all see where this is going.....well one ended up falling and hitting me on the head. It was the 6 foot Jet as well. The biggest, heaviest clamp I own. A nice gash in the head complete with much blood. Dr MrsArcher pronounced that stitches were not required and I got back to work.Those were the droids I was looking for.
https://autoblastgates.com.au
-
14th February 2011, 02:27 PM #9Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
A true case of blood, sweat and tears NC!!
I can see this is going to be one bench worth waiting for!
Now do as the good Dr. Said and get into it!
-
14th February 2011, 03:15 PM #10
-
14th February 2011, 03:33 PM #11
Lots of nails, nice job. I found that some idjit had used a stapler on one of my beams, they were hard to find as more often than not the bridge was twisted off and the legs were still in the timber.
As for the blood, sweat and tears....wait till the chisel work starts
Looking good NCA, love a bench build
-
14th February 2011, 04:24 PM #12
I'm kinda' embarrassed by your apparent rapid progress I have to say. A 'couple of hours' and this is the result? Bugger.
Love the timbers, especially those legs. The mottled top will look awesome I reckon. Best of luck with it."Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so."
- Douglas Adams
-
14th February 2011, 05:46 PM #13
Actually chisel work is a bit of a problem. I cut some practice M&Ts on the leg offcuts and i had to sharpen my chisels about 4 times. They're not very good. I've had a set on order from LN since August last year but I just can't get 'em. I'm a bit annoyed with LN Australia atm. Time to go elsewhere i think. Another forum member ordered direct from LN USA and had a set within a week. Cheaper too.
Huh, actually the nail pulling was last year and the legs were machined a couple of weeks ago. I only got so much done on the weekend because of the awesome babysitting powers of the MIL. There might be a bit of a gap until more significant progress is made but i'm just following the example of more experienced forum membersThose were the droids I was looking for.
https://autoblastgates.com.au
-
14th February 2011, 05:51 PM #14
-
14th February 2011, 06:04 PM #15
I saw those Kev and i was very tempted but i need a set of bevel edged. Hmmm...they are nice...not long to go...no no no.
I was intending to buy a BE set and add a couple of mortice chisels when i could afford it.
But they are cheap as long as they go for close to the current price....no. NOThose were the droids I was looking for.
https://autoblastgates.com.au
Similar Threads
-
filler for recycled hardwood
By s_m in forum FINISHINGReplies: 15Last Post: 10th June 2007, 11:36 AM -
filling recycled hardwood
By s_m in forum WOODWORK - GENERALReplies: 0Last Post: 1st June 2007, 10:52 PM -
Where to get recycled hardwood
By hsc07ww in forum TIMBERReplies: 5Last Post: 12th December 2006, 04:00 PM -
Recycled hardwood
By bobmundy in forum ANNOUNCEMENTSReplies: 0Last Post: 5th September 1999, 05:57 PM