Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
Thread: Wood Screw Help
-
4th April 2013, 04:13 PM #1
Wood Screw Help
I don't have a woodwork workbench and I really have zero space. I came across an article talking about these “Scandinavian origin,” portable benches after one was sold in Australia recently.
This seems like a great solution for me until my situation changes and I can build a bigger bench. The other bonus of this small bench is it shouldn't cost too much in timber.
benchattachmenttop-1.jpgmilkman_overall_IMG_3020-1.jpgportable_bench_overall_IMG_2046-1.jpgworkbenchattsite-1.jpg
The second image is not an original but a new copy with a full width wagon vice.
First & last photos are top & bottom of an original.
I would move the clamps so they line up with the back edge of the dog holes and maybe to the inside of the wagon vice. So it sits more to the corner of the table to get fixed to?? and avoid to much cantilever effect.
It seems easy enough to construct with the exception of making the wood screws and threaded holes. Is there anyone in Vic that can help me make them? I'm in the Doncaster area but willing to travel an hour or so each way.
threaded_knobs_img_5387-1.jpg milkman_face_IMG_3023.jpgmilkman_overall_img_5386-2.jpgmilkman_tail_IMG_3030-1.jpgportable_bench_screw_detail_IMG_2054.jpgportable_bench_screw2_IMG_2057.jpg
I think the threads should be about 1-1/4”
Size, might be smaller than you thought.. Based on the original bench, the whole thing is 1-5/8” thick, 9-5/8” wide and 31” long
MilkmansWorkbenchSketchUp.png
If I can afford the timber etc I would actually like to make two and send one to my little nephew to whom it would look like a full scale bench.
-
4th April 2013 04:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th April 2013, 04:55 PM #2
What timber do you want to use to make it. Douglass Fir probably wouldn't cost so much as hard woods and (from personal experience) is plenty strong enough for your bench.
Rob
-
4th April 2013, 05:27 PM #3
Hadn't gotten to selecting timber yet as if I can't do the wood threads, have to scrap the idea.
I do have some weathered hardwdood left over from when the folks built the house 25 years ago, which might be a possibility.
-
4th April 2013, 06:55 PM #4
I've never seen the like. Very cute. If you want to get working and can't get timber screws, just use 16mm booker bolt and captured nuts. Bore and screw the ends into a soft timber to protect the work.
Cheers, Bill
-
4th April 2013, 07:34 PM #5
-
4th April 2013, 08:53 PM #6
It must be a Qld. name , continuous threaded rod. I've been thinking of the bench since my last post. It could be clamped to the end a rather substantial table on my verandah for bits not requiring me to be near power tools.
Cheers, Bill
-
4th April 2013, 08:53 PM #7
Try " brooker rod " or threaded rod for the metal rod
-
4th April 2013, 08:57 PM #8
I've never seen it in print, only ever heard spoken. I really do learn something new every day.
Cheers, Bill
-
4th April 2013, 09:14 PM #9
Did a quick google and learnt that brooker / booker are interchangeable. Also called all thread.
Whilst googling away wooden vise screw threads to buy are $135 each from Lake Erie and two others in the states. UK is 160 GBP.
You can buy a wood thread box and tap from carbatec for $79 for 1 1/2 inch
You could read this thread and contact RayG ? (priceless)
-
4th April 2013, 09:45 PM #10
-
5th April 2013, 01:16 AM #11
Hi Dale,
Thanks for the PM, I'm planning to be cutting some wooden threads this weekend, so your timing is pretty good.
Regards
Ray
-
5th April 2013, 08:40 AM #12
-
5th April 2013, 09:51 AM #13
Yes, I can make up a set of screws and see how it goes. It will be english oak and 2" diameter. Do you have a wood lathe to make the other bits?
If you want to keep the overall thickness at 1 5/8" I'd be guessing that you want 1" diameter, no problem to make the threads, but I'd need to make a tap. and if you already have timber you want to use you'd need to get that to me somehow.
Regards
Ray
-
5th April 2013, 07:20 PM #14
RayG,
That will be awesome.
2" Is fine I can work to suit that no need to go making any tooling just for me, That your willing to make this part is more than enough.
I don't have any special wood lined up, so oak is more fine. I also have access to a lathe, which I can use to make the heads, so I should be able to manage that part.
-
7th April 2013, 11:15 AM #15
Hi DSEL74,
I've had time to look a bit more closely at the design, I think 2" diameter will be too heavy for that size. So I'll be making a tap to do the job, which means you can have whatever diameter you'd like. Then you can borrow it to tap the holes in the bench where required.
I'm thinking that 1" would look about right..
Do you have any dimensions on length or size of the head section?
Regards
Ray
Similar Threads
-
To screw or not to screw?
By hereselmo1 in forum BOAT BUILDING / REPAIRINGReplies: 48Last Post: 30th January 2010, 04:03 AM -
screw job
By JimboJ in forum WOODWORK - GENERALReplies: 5Last Post: 7th August 2006, 01:12 PM -
Fixing decayed screw holes in wood
By ronnie in forum WOODWORK - GENERALReplies: 8Last Post: 25th April 2005, 10:36 AM