Results 31 to 45 of 46
Thread: YAWBT - My new workbench
-
26th November 2019, 02:15 PM #31
Welllll ....... I did start to type a reply this morning, to suggest in as diplomatic a way as I could that it might be a bit of a shame to destroy what looks like a pretty decent bit of futrniture. Worn drawer sides & runners are often pretty easy to deal with, especially on the well-made pieces. Four-drawer chests in this style are pretty common, but more often in Aust. cedar, not in Mahogany. Cedar doesn't stand up to wear & tear nearly as well, and some are prtty poorly constructed whe you look inside. I suspect the joinery on that COD (for it is really that, not a "tallboy", by most definitions) is pretty sound - it looks nicely plumb & square in the pic.
Then I thought, "It's WPs bit of wood & he can do what he likes without having some old prat like me tut-tutting about it". Better it get some sort of new life than become landfill....
Cheers,IW
-
26th November 2019 02:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th November 2019, 11:09 PM #32
Ian, you are spot on. The old duck who was selling it was very pleased at my enthusiasm for it... but gulped and went pale when she was told its fate.
She was a bit posh in a well-to-do suburb, so it may have been one of those grandfather-hand-me-downs that she has reluctantly let go to a keen-eyed antique collector.
Gods! The barbarians are at the gates!
Im particularly liking those massive deep drawers.
-
27th November 2019, 08:19 AM #33
Actually, I took a much more critical look at the full-size pic instead of just glancing at the thumbnail & I'm starting to think I'm dead wrong!
There is something about the wide & variable gaps round the drawers, the fairly rough round-overs on their fronts, plus the not-very well-executed D/Ts (& 'wormy' sides of unknown species) & the Mahogany drawer bottom on the drawer you pulled out that suggests to me this might be one of those made-in-Indonesia imports that were brought in by the container load about 30-odd years ago. They were made from genuine Mahogany (Swietenia sp.) that was planted a long time ago as shade trees for coffee, so I was told. It should be easy to establish if my supicion is correct, the inside joinery is usually as rough as it gets, though I once saw very well-made stuff in a small interior decorator type shop in North Sydney. I got chatting to the shop owner & she told me they had them made by "special" craftsmen to their specifications. Hmmm, maybe, but they were a cut above most of the similar stuff I'd seen, and an order of magnitude better than the couple of Mahogany bedside tables LOML bought from a place dealing in similar stuff here in Brissie.
So if my suspicions are correct, you may proceed with your plans with a clear conscience, methinks....
I have to say, I can't quite see in my mind's eye how this COD is going to metamorphose into a workbench, so I will watch the process with interest. To my way of thinking, deep drawers and tool storage do not a happy marriage make - lots of shallow drawers are my preferred option. The portable bench I made a few years ago (when advancing decrepitude made my original portable bench un-portable) is more or less what I plan to take when we move to more restricted quarters. Fits nicely.jpg
I judge it's a bit shorter and a bit wider than the top of your COD. The tool chest under has LOTS of shallow drawers: Drawers done.jpg
I've just got to get some working drawings for a Tardis, so I can re-design the toolbox to hold about 3 times what it holds now & I'll be right.....
Cheers,IW
-
27th November 2019, 08:53 PM #34
Hehe, everyone knows I tend to exaggerate. A priceless relic! The lost Arc! Priceless heirloom!
Perhaps, in the eyes of many, it is simply the 70's version of IKEA.
I look at these things and always think of capitalism - people will only pay what they will pay. No point investing business time in a detail few, if any, know exists let alone care about.
Good for the sublime artists of this forum to thrive!
Tomorrow I'm hoping to get a bit of a start. Im the proud new owner of 2 handmade kiridashi, 2 "line" kihiki and a new "cutting" Kehiki kanna - which I think is absolutely incredible! Naturally, all are Japanese made. Good for kumiko
-
27th November 2019, 09:22 PM #35GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
-
25th October 2020, 09:15 PM #36
Gramercy Holdfasts - minimum bench thickness
Oh ye capricious gods! Grant me the strength to ACTUALLY BUILD a bench!
I look at the problem in the mirror each morning...
On HOLD FASTS, what would be the minimum thickness needed for them to work properly?
Any opinions?
Would 45mm be enough?
I'm making a mini-workbench first (others here have motivated me) then upon achieving THAT small goal, a larger balcony bench. (Time to let the old BBQ table and benches be just that)
-
26th October 2020, 04:38 AM #37
from Holdfasts by Gramercy Tools
The holdfast is designed for 3/4" hole in a workbench top of a 1 3/4" thick or thicker.
6 1/2" reach. Maximum clamping 7 1/4" in a 2" thick benchtop.
45 mm is marginally thicker than 1-3/4", but not by much. I'd be a bit leery using Grammacy hold fasts in a softwood bench topregards from Alberta, Canada
ian
-
26th October 2020, 05:47 AM #38
I just found this thread, fantastic another bench build and semi local!
Whoaaahhh those vice screws! What...how.. I want one.
I decided im going to be slower and more careful this bench build and a minimum use with my 3/4" bit for my holdfast. Only have one but works perfect in nearly any thickness over 50-60mm from memory
Looking forward to seeing progress and material selection. Good pick up on the bench top
Sent from my SM-A515F using Tapatalk
-
7th January 2021, 12:20 AM #39
Version 1 - Woodpixel Thought
Here we are, ONLY 2 and a half YEARS after I started this thread.
Judging myself harshly this is a long time between idea and doing, but judging by others builds I'm bang on target
Now, things did change for me, somewhat radically and without choice, but ces't les vie.
NOW I've a new idea!
It was inspired by watching many Japanese videos on how they use benches for working, my being fat and inflexible with a dud hip (birth), dud knee (high adventure!), crunchy back (mugged!) and a few bullet holes.... makes ground work a challenge.... This last weekend I blasted through a bunch of stock preparation using a Veritas Scrub, Jack and smoother on some hard-as-buggery pallet timbers. I also had a bugger of a time cutting as the edges of the bench was terrible - no support - an a-ha moment(!).
It went really well, so I thought to have a think about a bench I can drag around, kneel on, sit on, bang hammers upon and plane upon.
This, attached, is my idea (a mini-Roubo picnic stool mashup!). I can't recall seeing this design previously, probably because it doesn't really work... but perhaps Mr Roubo missed something here. (A big bench is next)
There are my thoughts....
-- Using a standard Bunnings panel of Beech ($109), Acacia ($99) or Merbau ($129) that is pre-made in 2200x600x26mm one can use TWO sheets and make this bench. Pine is also an option.
-- Cutlist is very simple (will put that up later, its simply drawn in my book)
-- There is almost no waste
-- Corners are massive dovetails. I'll put that detail and an explosion diagram up later.
-- There is a vice on one end
-- One can bore their own dogs where ever
-- The dogs aren't intended to be Parf-table-accurate things, or replicate the 96mm(?) centres of Festool. They are simply 100mm separations down a mid line, as I liked the symmetry
-- Easily flipable for lefties and righties
Dimensions!
-- 1500mm long
-- Uses 26mm timber
-- 52mm top and left side for Gramery holddowns
-- 500mm tall. I am 196cm tall, so my knee bend height is probably a little different than most
-- Height can be extended 200mm without using more materials (see Sheet 1, at the end. Its spare)
-- Length can be extended 200mm " " " "
-- As designed it will weight 35kg in Acacia and 40kg in Merbau.
WHY?
-- The end section is so I can support material and saw it (the gap is for the Japanese pull saw)
-- I can use the end vice to hold recalcitrant jobs while sawing (again using the centre)
-- I chose 1500mm long so if I make a left AND right version of the bench, they can be used as saw-horses for sheet goods (of width 1200mm)
-- Being a bit of a Fat Bastard, I can sit down while working
-- I can kneel on this to stop things moving
Additions?
-- There is a section of 2200x200 left over which could go towards making some sort of extra brace for the non-support side, or wide feet
-- I am still thinking about that cutlist, it bugs me about the spare timber
-- I can see 3 fixes to reduce cuts already... so onto version 2 !
I'll put up the plans and everything if anyone wants to build their own.
knee bench - facing.jpg knee bench - offside.jpg knee bench - kneeling.jpg layout.jpg
-
7th January 2021, 02:16 AM #40
Version 2 - New Woodpixel Thought
Double Think! Added Newness!
Here is version 2
-- Dovetails added on
-- A decent vice... I'll be using the wooden vice supplied by the ever-generous IanW, may the gods bless him with wines of excellent vintage.
-- The cut list is now more efficient. 5 fewer cuts
-- More efficient wood use. Still 2 sheets. A bench for $200 is a bloody bargain!
Problems I foresee are:
-- The nut behind the vice isn't catered for in the diagrams (see post 1 for a picture of IanW's mighty ingenuity)
-- Will this Big Nut interfere with clamping?
-- Should the Central Divider be double thick like the whole bench top?
-- The idea of the divider is to protect the vice thread from damage. It is long enough to allow centre sawing at one end AND offer a sneaky clamping space
-- I thought to add as many clamping surfaces as possible
-- I thought to add the "spare" bit of 1500x150mm along the bottom on the opposite side of the main clamping/holdfast vertical surface..... hmmmmm.... would it get in the way?....
Dimensions aren't perfect for the final job, as the sheets are 600mm wide and obviously 4 cuts of 150mm plus kerf aint gonna go! ... plus a few Oops-factors, flubs, planing and sanding.....
knee bench 2 - facing.jpg knee bench 2 - offside.jpg knee bench 2 - kneeling.jpg knee bench 2 - vice off.jpg knee bench 2 - underside.jpg knee bench 2 - vice.jpg
-
7th January 2021, 02:32 AM #41
Cutlist - Booooooyaaaaa!!!!
Bloody HEAPS of spare.
These can be fatter and wider easily.... just a matter of PUMPING THOSE NUMBERS!
By all the Gods I love Cutlist Plus as a program. Pure champion. Worth every cent.
Edited: rotated a few bits to match the grain (such as vice faces), fattened kerf to 5mm and added a 2mm part-padding for trimming up. Program made an even BETTER layout, all of these wicked little options are click click click and DONE. Niiiiicccceeee.
cutlist sheet 2.JPG cutlist sheet 1.JPG
-
8th January 2021, 01:25 AM #42
So, after a day of doing NOTHING I managed to find that what I've reinvented is called a split top saw bench.
Sort of.
All the others have limited purpose, rather than my own fabulous example of gripping ingenuity and vice-clampy cunning....
I did finish Version 3 of the plans, plus a finalised cutlist that is so simple that a child can follow it.
It should make an excellent project when made in left-right pairs.
I should note, with horror, that wifeypoo DID see the Sketchups on the PC screen this morning and declared they would make excellent BBQ stools AND a nice table for in front of the telly.... what have I created! A monster!
Off to Bunnings today to grab some of those sheets.
-
1st May 2021, 09:29 PM #43
Plans for my benchtop mini-bench have been complete for a while.
The idea for this is so I can put it up on the table inside or on the BBQ table outside for smaller work or when I make kumiko/lamps/displays.
The entire design maximises the use a single panel from Bunnings (2200 x 600 x 26 in Merbau or Acacia) with minimal waste and ease of cutting.
The benchtop size is 550 x 478. Surfaces are 52mm thick with plenty of places to grip work and hold the mini-bench down. Total weight in Merbau is 21kg.
These ideas are free to use for your own projects. The cutlist is done with Cutlist Plus Fx.
Capture.PNG mini bench 550 fat tenons - Front.jpg mini bench 550 fat tenons - dimensions.jpg mini bench 550 fat tenons - underside.jpg
Once this is done, I'll make the sitting-bench.
edit - added newness - I thought to add that this is 272mm tall, which means its designed to handle Gramercy Holdfasts, which are 9 3/4" long. This means it can hold down the thinnest of timbers without the bottom of the holdfast fouling on the table upon which the minibench sits.
The various legs are all through tenon and draw bored. This is for ease of making (drawbores are easy, plus this minimises clamps), plus ease for n00bs to make a decent work surface at lowest cost/tools/skills.
If anyone wants the Sketchups and/or cutlist raw files to noodle themselves, just ask and ye shall have.
-
19th May 2021, 09:00 PM #44
Minibench - Stage one complete!
Cuts are done. Things are rough as I'm so out of tune! Its not so effortless to get back on the bike is it
This is what an entire panel breaks down into....
IMG_20210519_163435.jpg
and these five parts are all that's left.... these will be used to make tenon wedges and some dowels for the draw-bores, but that's it.
IMG_20210519_163546.jpg
Gosh those Merbau panels are heavy, I don't think 21kg is right unless I've become feeble! . Only had my little balcony but it was good fun (but cold! Only ~6° today).
Tomorrow is glueup ... and temperature depending, trueing up those rough edges, adding the roundovers and tenons.
Not having a shop is a PITA!
-
20th May 2021, 08:50 PM #45
WTB - Veritas Shooting Plane - LEFT
Thought to mention, this job has highlighted my need for a proper shooting plane.
If any of my loving followers are excess a left-handed Veritas shooting plane that can go to a wonderful home... look here --> Veritas Shooting Plane - LEFT
Similar Threads
-
A temporary workbench to build a workbench on
By doug3030 in forum THE WORK BENCHReplies: 5Last Post: 23rd October 2016, 07:46 AM -
the workbench you build before you have a workbench to build your workbench upon
By mhewitt in forum THE WORK BENCHReplies: 10Last Post: 15th September 2012, 08:51 PM -
a workbench to make a workbench
By mic-d in forum THE WORK BENCHReplies: 21Last Post: 2nd November 2008, 03:32 PM -
Catch-22 - building a workbench without a workbench
By brianhay in forum THE WORK BENCHReplies: 11Last Post: 18th January 2005, 04:56 PM -
Catch-22 - building a workbench without a workbench
By brianhay in forum WOODWORK - GENERALReplies: 11Last Post: 18th January 2005, 04:56 PM