Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
29th April 2016, 11:06 PM #1New Member
- Join Date
- Jun 2009
- Location
- West Aust
- Posts
- 4
Metric and Imp Bolts, Thread sizes and torques
Hi all
This is a printable double sided Bolt Drill Thread Chart for the workshop. Laminate it.
The torques are based on standard bolt tensions for reusing bolts.
Important for the THREAD PITCH INDICATOR on the side.
If you print the chart measure the 1mm thread form with an accurate rule to make sure the printer is not distorting the thread pitch forms.
Use the peak of the bolt to the peak of the thread forms to identify bolt threads pitch. (It is not a thread gauge so don't try to use like a thread gauge)
TAPPING DRILL & Torque Con Chart.pdf
Regards moorebrm
-
29th April 2016 11:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st August 2016, 09:24 AM #2Senior Member
- Join Date
- Sep 2011
- Location
- Northern Beaches, Sydney
- Age
- 68
- Posts
- 329
Very handy. Thanks Barry.
Stewie
Similar Threads
-
LH Thread Bolts
By DSEL74 in forum METALWORK FORUMReplies: 12Last Post: 16th May 2015, 10:15 AM -
Cutting Metric thread on AL-330
By Sterob in forum METALWORK FORUMReplies: 10Last Post: 2nd December 2013, 03:35 PM -
1" button dies going to metric sizes?
By bob ward in forum METALWORK FORUMReplies: 8Last Post: 23rd October 2013, 06:57 PM -
metric/imperial sizes.
By cookie48 in forum WOODWORK - GENERALReplies: 8Last Post: 11th August 2011, 05:55 PM -
Metric nuts and bolts
By Dan in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 4Last Post: 7th September 2003, 07:04 PM