Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
8th February 2007, 05:23 PM #1what finer points?
- Join Date
- Nov 2006
- Location
- canberra
- Posts
- 120
idears for indexing (disc rotors)
i was looking a a motor bike outside work the other day and i looked at the disc rotor on the front it was at this point that i thaught that would make a mighty good indexing wheel it had holes in the right places too and i'm sure they'd be cheep as chips ar a wrecker.
has any one used these before?
Mattcocaine would have been a cheaper addiction
-
8th February 2007 05:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th February 2007, 11:26 PM #2
Haven't tried that. I found a procedure someplace to use a circular saw blade as indexing to drill holes for an indexing wheel. I figure, why not just use the blade as the index wheel?. Need to modify the centre hole for mounting, and use a swinging pin holder to engage the gullet in a radial direction. Swing radius and pin size would depend on the blade size and gullet form. Might be able to make one swing radius work for multiple diameters. This could provide oddball divisions which are hard to get in a normal wheel. For example, 54 teeth = 2 x 3 x 3 x 3; = 18 x 3, 6 x 9, 9 x 6, etc. Just need to factor the number of teeth into prime numbers, and take whatever combinations you like. Table of "Factors and Primes" in my old copy of Handbook of Chemistry and Physics, but likely available on the net[*]. Old saw blades, so dull they can't cut butter, usually available at garage sales for less than $1 each. Still in design stage, though.
[* Also treated in Machinery's Handbook, but needs more hands-on arithmetic.]
JoeLast edited by joe greiner; 8th February 2007 at 11:30 PM. Reason: [added]
Of course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
9th February 2007, 12:02 AM #3
Haven't used one but I wish I had bloody well thought of it way back when I was hunting around for a 36,60 or 72 tooth cog, gear or sprocket to make an indexer for the MC900! Couldn't find anything suitable and made this instead. Ripper idea Matt - post some pics when you get it done (you have committed yourself now you realise!? )
-
9th February 2007, 07:52 PM #4what finer points?
- Join Date
- Nov 2006
- Location
- canberra
- Posts
- 120
yep i'm going to pick up a second hand disc tomorrow. problem is i don't have a lathe to put it on! it's going to go on my nova 1624 when i get it.
Mattcocaine would have been a cheaper addiction
-
11th February 2007, 03:53 PM #5Woodturner
- Join Date
- Jan 2006
- Location
- Lake Seminole, Georgia USA
- Age
- 79
- Posts
- 1,111
This may help y'all make your indexing disks. Go to this web site >> http://www.smithart.us/index.htm << and click on "Downloads & Misc". You will find a list of downloadable, printable, index disks to overlay your actual disk, and mark the holes. Rather nice of this fella to do all this work and offer the plans at no cost.
-- Wood Listener--
-
12th February 2007, 09:50 AM #6
Hi ,Joe good idea! i too had read about this- in the machinist bedside reader,the first i think.He has description on how to make index plates of all sorts,good value for money books.Maybe your local library has it.Here is a link to the books:
http://www.lautard.com/t1.htm
Let us know how you get on.RegardsLast edited by forge; 12th February 2007 at 12:08 PM. Reason: add info
forge
-
17th February 2007, 03:10 AM #7Intermediate Member
- Join Date
- Aug 2006
- Location
- Arkansas, USA
- Posts
- 25
-
18th February 2007, 04:40 AM #8
Fortunately (Unfortunately? ), I have some proficiency with CAD. AutoCAD has a capability of generating polar arrays. Although unusual pitches of 7 or 11 divisions might be cool, this is the sort of thing that can get out of hand in a hurry. Only reason I'd want, say, 23 divisions would be to show off.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
20th February 2007, 06:16 PM #9what finer points?
- Join Date
- Nov 2006
- Location
- canberra
- Posts
- 120
i got a disk today but the holes are all over the shop! almost random spacing so thats going to be made into a big spinning top! i'll keep looking for a disk thats better. i had a look at a car disc but they are way to big. i'm thinking moutain bike disc now.
Mattcocaine would have been a cheaper addiction
-
20th February 2007, 07:39 PM #10
Why not make a disc out of say !/8" aluminiuim and drill the endex holes yourself. Its easy enough as long as you set it up properly
-
20th February 2007, 08:05 PM #11
I again recommend using band saw blade wrapped around a disk.Have an aluminium disk mounted on the same shaft.Use the bandsaw blade teeth spacings to space your holes(mount on drill press and drill holes).Alternately just make up discs with bandsaw blades wrapped around them. again -have a look at this http://www.lautard.com/t1.htm
and a version of this >http://home.vicnet.net.au/~pwguild/o-rosego.htm or this http://www.homestead.com/tool20895/files/INDEX.htmforge
-
20th February 2007, 11:06 PM #12
Yesindeed. I'd forgotten about the bandsaw blade for subdividing an ellipse. I think a plywood disk might be better, though, as you'll need to fine tune the diameter to get the pitch to match at the join. The latching mechanism I have in mind could be awkward perpendicular to the disk, because of eccentric loading. Might be able to work something else out which doesn't have that deficiency, maybe a pinching-type latch front and back of the wheel.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
21st February 2007, 12:11 AM #13
push bike gears mite work.
insanity is a state of mind if you don't mind it does not matter.
-
21st February 2007, 08:48 PM #14what finer points?
- Join Date
- Nov 2006
- Location
- canberra
- Posts
- 120
Similar Threads
-
Glue for disc sander
By jarrahhead in forum GLUEReplies: 4Last Post: 1st August 2006, 06:08 PM -
Sanding disc for tablesaw - mediocre result
By zenwood in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 17Last Post: 20th October 2005, 08:49 AM -
Any special techniques for using disc sander
By ClintO in forum WOODWORK - GENERALReplies: 4Last Post: 25th January 2004, 06:48 PM -
Record Disc chisel
By Kiwi Greg in forum WOODTURNING - GENERALReplies: 4Last Post: 12th August 2003, 04:02 PM -
Lancelot Woodcarving Disc & Replacement chains
By Peter Cera in forum ANNOUNCEMENTSReplies: 3Last Post: 5th July 1999, 09:21 AM