Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 45 of 53
Thread: Indexed Bowls
-
14th April 2010, 11:02 AM #31
-
14th April 2010 11:02 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th April 2010, 11:18 AM #32
Here is an example Dave approx dia is 14" with 14 bowls x 2" dia
and 14"x 14 bowls by 3" dia
settings for indexed notches would be the same just size of bowls is different.
I haven't variefied if the index notches to the Jig, to the number bowls or set up for the pics below
-
14th April 2010, 07:54 PM #33
In regard to David's question re-limit of main bowl size with the dimensions for the drawing there are two concerns.
1 the centring holes radiating outwards will only allow a certain size of blank unless you don't mind a wide edge.
2 the counter weights required to balance it all
Here's a photo of additional weights Darrell has had to use
-
26th May 2010, 09:43 PM #34
I see today the Jig has made it into the Australian Woodsmith Issue 77
Along with it is a clock done by Darrell Smith guess who owns the clock was a Christmas Present from LOML.
-
8th June 2010, 12:28 PM #35
8th June Updates
The need for some corrections and updates on the drawings were required, nothing major just to clear some confusion.
Plus some additional photo's as seen in previous posts above.
All being well it will be demonstrated at The Sydney Working with Wood Show.
Ray
-
18th June 2010, 09:44 PM #36
WOW ok so I miss-read how many have looked at this thread over 1200.
Day one at the TSWWS it drew many peoples attention, so thanks to all who came and saw it in action keeping Darrell flat out all day.
-
10th November 2010, 10:49 PM #37
Next Phase
Next phase yes there is another step forward development is progression.
Ok so you have turned the platers multi-bowl and now considering where to next.
David has made up a 60 indexed plate to also go onto the jig (see photo) he prefers the 30 which he has also made.
Which when fitted along with your Rose Engine or OT lathe set up will now produce Ornamental turning on the Index bowl jig.
Photo of the 60 plate
and OT work produced on a platter.
-
15th November 2010, 01:04 PM #38Member
- Join Date
- Jan 2008
- Location
- Adelaide, South Australia
- Posts
- 90
-
28th November 2010, 03:02 AM #39
-
28th November 2010, 10:17 AM #40
-
28th November 2010, 03:15 PM #41
Hey WR
How did you go with the cargo rates LOL well I will download the pdf and do some reading on the subject and that would be awsome to learn from you guys
Ian
-
28th November 2010, 03:28 PM #42
Car go rates well if you go by car enjoy the trip i have heard it takes about 3 days each way and this time of year Nullabor reaches 55C.
Ian the PDF is for the making of the Indexed Bowl Jig for serving bowls only. I have yet to do a write up for the double indexed set up to do the Ornamental plater. None of it covers making a Rose Engine or making the tools etc used to do the surface decoration. Don't let this put you off. Its a hoot making the stuff and the world over new ideas coming all the time.
-
28th November 2010, 03:40 PM #43
Hey WR
I sent you a pm I would never let anything put me of
Ian
-
28th November 2010, 04:14 PM #44
Pm & e-mail on way
Ian the Index Bowl Jig Or Off Centre jig puts the best of them off. I myself have not used it as yet but will be giving it a try one day.
-
28th November 2010, 04:19 PM #45
Hey Ray
I have seen some videos of the off center chucks and they look very cool I still have a lot to learn from basic stuff but when I do reach my comfort zone I plan on taking on this stlye of turning it looks like fun
Ian
Similar Threads
-
Indexed Tungsten-Carbide tips
By savage in forum METALWORK FORUMReplies: 19Last Post: 14th May 2007, 12:01 AM -
First few bowls
By KristianH in forum WOODWORK PICSReplies: 10Last Post: 1st March 2005, 12:19 AM -
No. Bowls per log
By DavidG in forum WOODTURNING - GENERALReplies: 3Last Post: 3rd December 2004, 12:42 PM -
More Bowls
By DarrylF in forum WOODWORK PICSReplies: 4Last Post: 27th September 2004, 10:06 AM -
Bowls etc
By DarrylF in forum WOODWORK PICSReplies: 12Last Post: 18th November 2003, 08:23 AM