Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
10th July 2018, 07:20 PM #1Novice
- Join Date
- Aug 2005
- Location
- Sydney
- Posts
- 19
150mm/250mm dia. Belt/Disc Sander with a Stand
This Carbatec sander unit has a single phase 800W motor. The belt's flat working area is 150 x 420mm. The belt part has a quick release belt changing system and can be tilted from 0 to 90 degrees. The table tilts from 0 to 45 degrees. The disc has a hook and loop sanding disc mounting for an easy changeover. The mitre gauge provides for a -60-0-+60 degree variable setting.
In very good condition. Looking to sell for $300.
Pickup only. Located in Woolooware 2230.
-
10th July 2018 07:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th July 2018, 03:30 PM #2Novice
- Join Date
- Aug 2005
- Location
- Sydney
- Posts
- 19
Sorry. I forgot to say that the sanding belt is 1220mm long.
Cheers
-
15th July 2018, 08:06 PM #3
If you're amenable to this being picked up on the weekend of the 28th, I would like to take this.
Will send a PM to organise.
-
16th July 2018, 11:13 AM #4Novice
- Join Date
- Aug 2005
- Location
- Sydney
- Posts
- 19
The weekend of the 28th of July is OK by me. Will PM with details.
SOLD.
Similar Threads
-
Scheppach Belt & Disc Linisher Sander 150mm x 910mm from Hare & Forbes
By crowie in forum GENERAL & SMALL MACHINERYReplies: 24Last Post: 8th May 2016, 01:13 PM -
Advice needed - Belt/Disc Sander with Stand
By Evanism in forum GENERAL & SMALL MACHINERYReplies: 7Last Post: 11th January 2015, 01:51 AM -
Replace drive belt on belt/disc sander.
By BlackbuttWA in forum GENERAL & SMALL MACHINERYReplies: 11Last Post: 24th October 2014, 10:41 AM