Thanks: 0
Needs Pictures: 0
Results 1 to 7 of 7
Thread: Bandsaw
-
20th November 2019, 09:55 PM #1Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 48
- Posts
- 111
Bandsaw
32"/800mm cast iron bandsaw. Edward B Scott, made in Northcote, Melbourne.
800mm throat. Resaw up to 300mm.
Excellent condition. The saw was completely rebuilt approximately 8 years ago.
New vulcanized rubber tires by Welco and ground with a crown by LS Barker (just before they closed for good).
New wheel axels and bearings.
Tables professionally ground flat.
NHP electrical gear.
3 phase 3 HP 960 rpm motor. The motor could easily be changed for a single phase.
I am only selling the saw as I have a second saw and no room for the both.
Pickup Wantirna or I am willing to bolt to a pallet and deliver to a freight company.
The guard were only ever meant to be temporary but are still functional.
Comes with a number of spare blades with various TPI.
Good solid saw. Can be seen running.
Not used commercially.
$1800.
Please call Andrew.
20191119_195938.jpg20191119_195948.jpg20191119_200417.jpg20191119_195955.jpg20191119_200040.jpg20191119_200106.jpg20191119_200055.jpg20191119_200248.jpg20191119_200345.jpg20191119_200352.jpg
Sorry the photos are sideways.. couldn't figure out how to rotate them.
-
20th November 2019 09:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st November 2019, 06:31 AM #2Senior Member
- Join Date
- Oct 2014
- Location
- Melbourne, Australia
- Posts
- 289
I’m very interested. Please put me on the list - I'll message shortly for some details on dimensions etc.
Ben
-
21st November 2019, 07:22 AM #3Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 48
- Posts
- 111
Hi Ben
No problem. I have decided to list it here only first before Gumtree and Facebook as I prefer to sell to a member of the Woodworking Forum.
Regards
-
25th November 2019, 09:07 PM #4Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 48
- Posts
- 111
Sold.
-
1st December 2019, 08:24 PM #5Senior Member
- Join Date
- Oct 2014
- Location
- Melbourne, Australia
- Posts
- 289
Just want to pop in a note for posterity to highly rate Andrew as a seller, restorer of machinery, and general good bloke. Thanks for the beautiful machine!
-
5th December 2019, 07:30 PM #6Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 48
- Posts
- 111
Thanks Ben, I hope you get a lot of use for a long time out of it.
-
5th December 2019, 08:07 PM #7GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,545
Damn that's an awesome looking bandsaw!
Just gotta say!
Similar Threads
-
bandsaw blade supplier for home made bandsaw mill
By 19brendan81 in forum SMALL TIMBER MILLINGReplies: 26Last Post: 4th May 2018, 01:53 PM -
Minimax bandsaw and Kreg bandsaw fence
By Larks in forum BANDSAWSReplies: 0Last Post: 7th September 2017, 10:26 PM -
Bandsaw Blade Width Selection & Bandsaw bed throat and blade Alignment
By thumbsucker in forum BANDSAWSReplies: 30Last Post: 17th May 2014, 09:06 PM -
Bandsaw for only the SMARTEST of Buyers -Bandsaw in Excellent Condition
By prozac in forum BANDSAWSReplies: 4Last Post: 8th June 2008, 06:23 PM -
Will Carbatec bandsaw blades fit Jet bandsaw?
By FlyingDuck in forum BANDSAWSReplies: 2Last Post: 13th May 2006, 06:32 PM