Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
24th April 2017, 05:18 PM #1
Sorby combo wood turning chuck suit early Woodfpast.
As new Sorby wood turning chuck.$45 not an auction.
It has a few slight marks and very faint rust spots but no sawdust?
1 inch by 10 TPI Early Woodfast.
Prefer local pick up but if no takers by the weekend will post.
weighs approx 3.5kg. Box 200 x 120 x 75. My postcode 2137.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
24th April 2017 05:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th April 2017, 08:45 PM #2
I have checked postage based on your location and size/weight, result was $17.60, which is acceptable for me. I am therefore willing to purchase and pay postage costs if this is acceptable to you, and can arrange direct deposit upon receipt of bank details. However I also note that your preference is a pickup sale, with a willingness to post if you cannot set up a pick up sale by the weekend. I have a pair of the early school style Woodfasts and would be happy to put the chuck away for them, but not phased if someone can pick up prior. Your call basically.
I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
25th April 2017, 11:44 AM #3
Hi Henry, has this been sold?
Cant see pics on taptalk not sure why, I couldn't use Taptalk to view Market Place either had to use a browser?
I'm interested if Malb doesn't take it.Last edited by wheelinround; 25th April 2017 at 01:19 PM. Reason: CORRECTION
-
29th April 2017, 01:28 PM #4
PM from Henry recvd, payment transfer proccessed, confirmation PM to Henry sent.
Sorry Ray.I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
29th April 2017, 09:12 PM #5
No worries I know its gone to a good home
-
5th May 2017, 06:08 PM #6
Chuck received via post, thanks PM sent to Henry with a little extra funds transfered as postage was more than AP estimator suggested.
I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
Similar Threads
-
Question about way to modify the rear of a small chuck to suit a Toyo ML-1 Spindle
By SurfinNev in forum METALWORK FORUMReplies: 12Last Post: 23rd June 2015, 11:11 PM -
ER32 Collet Chuck to Suit Hercus 9 Lathes
By Col2310 in forum METALWORK FORUMReplies: 6Last Post: 10th September 2010, 09:26 AM -
ER32 Collet Chuck to Suit Hercus 9 Lathes
By Col2310 in forum METALWORK FORUMReplies: 4Last Post: 3rd June 2010, 06:22 PM -
What drill chuck to suit AL-30 lathe?
By faroogoo in forum METALWORK FORUMReplies: 4Last Post: 30th June 2009, 12:01 AM