Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Belt/Disc sander
-
25th November 2020, 06:43 PM #1
Belt/Disc sander
I have a 150/914mm disc and belt sander surplus to my requirements. The unit has been mounted on a base with a fixed table built in for the disc. This helps to maximize the area that can be used but the original table can be refitted if wanted.
It comes with 4 spare quality belts (2 at 80g and 2 at 120g) from the Sandpaper Man and 4 cheaper 120g belts from Ebay. The disc has a hook and loop convertor fitted so discs are easy to change.
It's an older machine but works fine and has had new bearings fitted to the motor about 12 months ago. The only thing missing is the fence that goes over the belt as I'm not sure what I did with it when I took it off and fitted a sanding table for what I was using it for.
Asking $50 which is basically to cost of the belts and you get the machine free.
As this is a heavy unit it is pickup only in the Geelong area.
Sander_1.jpg Sander_2.jpg Sander_3.jpg Sander_4.jpg Sander_5.jpg Sander_6.jpgDallas
-
25th November 2020 06:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th November 2020, 07:07 PM #2Senior Member
- Join Date
- Mar 2011
- Location
- Melbourne
- Posts
- 150
I’ll take it if you can hold out till i can pick it up
Sent from my iPhone using Tapatalk
-
25th November 2020, 07:12 PM #3Member
- Join Date
- Aug 2020
- Location
- Melbourne
- Posts
- 50
I’ll take it
-
25th November 2020, 07:14 PM #4Member
- Join Date
- Aug 2020
- Location
- Melbourne
- Posts
- 50
Sorry a bit slow but will in the Q if pass through
-
25th November 2020, 08:29 PM #5
-
25th November 2020, 08:31 PM #6Senior Member
- Join Date
- Mar 2011
- Location
- Melbourne
- Posts
- 150
Probably late dec sometime, completely understand is you want to jump onto the next buyer
Sent from my iPhone using Tapatalk
-
25th November 2020, 10:20 PM #7
I won't be around after Christmas but if you can arrange it before then I will hold, otherwise I will have to move to the next in line.
-
26th November 2020, 10:25 AM #8Senior Member
- Join Date
- Mar 2011
- Location
- Melbourne
- Posts
- 150
OK move it along. work is getting too crazy and I honestly cant commit to a date at this point
-
26th November 2020, 10:55 AM #9
Okay, thanks.
Now available to Porter0206 if still interested.Dallas
-
26th November 2020, 11:23 AM #10Member
- Join Date
- Aug 2020
- Location
- Melbourne
- Posts
- 50
Thank you both and will pm for pickup details
-
26th November 2020, 08:57 PM #11
Sold to Porter0206 subject to payment and pickup.
-
27th November 2020, 12:40 PM #12
Sold to Porter0206. Great to meet you and your lovely wife.
Dallas
Similar Threads
-
Sherwood 6 x 9in Belt/Disc Sander - trimming the disc velco backing?
By Wanderanwills in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 26th March 2019, 03:25 PM -
Replace drive belt on belt/disc sander.
By BlackbuttWA in forum GENERAL & SMALL MACHINERYReplies: 11Last Post: 24th October 2014, 10:41 AM -
Belt/disc sander - which one
By FenceFurniture in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 16th November 2010, 05:27 PM -
Belt/Disc Sander
By sam63 in forum GENERAL & SMALL MACHINERYReplies: 10Last Post: 8th October 2007, 11:44 AM