Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Carbatec Big Boy sander $800.
-
14th April 2020, 03:10 PM #1
Carbatec Big Boy sander $800.
I have a few machines to sell that came from a workshop with a leaky roof.
Some are unused, some like this sander had minimal use.
This has a lightly worn 60 grit sanding belt, total usage less than an hour I’d guess.
Comes with 3 new Klingspor 80,120 and 240 belts plus crepe cleaning rubber.
Also comes with some rust to the cabinet as pictured.
These now have a 750 long table and list at about $1500.
This sander has an 850 long table and I want $800.
Possible delivery in Sydney if you can unload from flat top ute.
Demo no probs.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
14th April 2020 03:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th April 2020, 03:52 PM #2Member
- Join Date
- Aug 2015
- Location
- Victoria - Ferntree Gully
- Posts
- 53
A bargain for someone! Wish it was in Melbourne as it would fit nicely in my workshop!
-
15th April 2020, 06:47 PM #3GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,134
where in sydney would you be willing to deliver to, anywhere around wahroonga?
-
15th April 2020, 09:08 PM #4
I’m in Concord.
Off to Fullersj Rd Chatswood tomorrow to pick up my ute after a service.
So Wahroonga no probs.
This is heavy.
A mate and myself hand loaded but he was a lot fitter than me.
PM me and we can swap phone numbers.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
8th May 2020, 11:42 AM #5
Just giving this a bump before advertising it elsewhere.
Sydney Delivery possible if you can unload.
I’ll be driving to Brisbane once they open the borders to us Mexicans again.
Can take it on the flat top ute.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
8th May 2020, 04:25 PM #6Intermediate Member
- Join Date
- Feb 2016
- Location
- NSW
- Posts
- 26
Hi H,
Can you tell me if it is an oscillating machine, or fixed height belt?
Thank you
-
8th May 2020, 06:59 PM #7
Yes it oscillates.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
8th May 2020, 07:31 PM #8GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,545
-
11th May 2020, 08:44 AM #9Intermediate Member
- Join Date
- Feb 2016
- Location
- NSW
- Posts
- 26
Hi H,
Would you accept $700 ??
I am near Port Macquarie but work in Sydney during the week (when not in quarantine) so could collect a week or 2 after quarantine lifts.
I'm happy to pay now and collect later.
Let me know.
Thanks
Colin
-
11th May 2020, 10:39 AM #10
You’ve bought yourself a sander.
I’ll send you a PM with my contact number and we can sort the details over the phone.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
N.S.W. CARBATEC 18 x 36 DRUM SANDER
By Jethrow in forum WOODWORK - Tools & MachineryReplies: 12Last Post: 7th June 2019, 11:30 PM -
Carbatec 18 x 36 Drum Sander
By Jethrow in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 30th March 2013, 08:15 AM -
Carbatec 600 mm wide sander
By hereward in forum GENERAL & SMALL MACHINERYReplies: 8Last Post: 17th March 2011, 12:58 AM -
Carbatec wds-400 drum sander
By justinmcf in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 3rd March 2011, 11:57 AM -
Carbatec sander and linisher
By shanker99 in forum WOODWORK - GENERALReplies: 2Last Post: 8th January 2011, 06:25 AM