Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
18th November 2023, 05:55 PM #1
Delta 22-560 thicknesser for parts
Evening all,
I've got a Delta 22-560 for sale for parts. Motor good, rubber rollers ok (need to keep clean and assist timber through), blades ok and additional spare set. All bearings turn fine, height adjustment and cutter lock also good. The drive pulley on the cutter head (the silver one) can be tightened with the nut, but has play and the key is worn. No belt (as this overheated with the loose pulley) and the vbelt cover is also a bit melted. You could probably pull the pulley with a bearing puller, see if you could fix the key and it would be ok. If you look in USA forums then was a common warranty repair.
Comes with a home made dust collector attachment.
So great for parts, many which you can no longer buy, or potentially you could get it working. Was fully operational until 24 hours ago. Be sad to see it scrapped, much happier if you could use it.
$75. Or a case of Coopers Sparkling Ale. Pickup Gladesville.
Cheers Tom
-
18th November 2023 05:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th November 2023, 06:05 PM #2
Similar Threads
-
Parts for a Delta 40-540 Scroll saw
By pwjupp in forum HAND TOOLS - POWEREDReplies: 0Last Post: 3rd April 2011, 07:03 PM -
Delta 40-540 parts
By Patonga in forum SCROLLERS FORUMReplies: 5Last Post: 27th May 2010, 12:07 PM -
Spare parts for a Delta Midi LA200
By SRH in forum WOODTURNING - GENERALReplies: 0Last Post: 8th March 2009, 09:51 PM -
Delta Parts
By Howdya do that in forum GENERAL & SMALL MACHINERYReplies: 12Last Post: 1st December 2007, 08:27 PM -
Delta Table Saw Parts
By newtowood in forum TABLE SAWS & COMBINATIONSReplies: 5Last Post: 22nd January 2006, 12:20 AM