Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
18th January 2023, 04:52 PM #1
Dewalt 735-XE thicknesser with Byrd Shelix
Am selling my trusty thicknesser as have upgraded to a Hammer, is a bit over 2 year old and has done limited work, would say has done around 10 hours of work in total.
Comes with the original three blade cutter head and blades and a set of replacement blades that came with the unit as well as around 6 new replacement blades for the Shelix.
Have also installed the Dewalt extension wings and have located on a movable cabinet which comes with the unit if desired.
Total cost at the time was around $2,150 and am looking for $1,400.
I'm located just out of Trentham 3458 in central Victoria and am able to deliver locally...say within 30k's or any location close to the Calder Freeway between Kyneton and Melbourne Docklands.
Photos attached.
Shelix.jpgIMG_0434 (1).jpgIMG_0433.jpg
-
18th January 2023 04:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th January 2023, 09:43 AM #2Novice
- Join Date
- Nov 2008
- Location
- Melbourne
- Posts
- 12
Hi Rudyvm, I'm in Trentham today and would be interested to have a look if that suits let me know. Cheers
-
19th January 2023, 03:26 PM #3
Sorry about the late response couldbewoodbe, have been been in a conference in Ballarat all of today and have just returned, you are more than welcome to have a look if you are up this way again or are still in the area.
- - - Updated - - -
Sorry about the late response couldbewoodbe, have been been in a conference in Ballarat all of today and have just returned, you are more than welcome to have a look if you are up this way again or are still in the area.
-
19th January 2023, 09:17 PM #4Novice
- Join Date
- Nov 2008
- Location
- Melbourne
- Posts
- 12
I'll probably be in Trentham next week and will let you know. Cheers
-
19th January 2023, 09:18 PM #5Novice
- Join Date
- Nov 2008
- Location
- Melbourne
- Posts
- 12
[QUOTE=Rudyvm;2300495]Sorry about the late response couldbewoodbe, have been been in a conference in Ballarat all of today and have just returned, you are more than welcome to have a look if you are up this way again or are still in the area.
- - - Updated - - -
I'll probably be in Trentham next week and will let you know. Cheers
-
20th January 2023, 09:52 AM #6
-
31st January 2023, 11:48 AM #7
Withdrawn
Withdrawn from sale due to lack of interest, will be reposted on external sites.
Similar Threads
-
SOLD: Carbatec 15" Thicknesser with Byrd Helical cutter head
By rod1949 in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 15th January 2021, 09:45 PM -
What a difference a Byrd Shelix Cutterhead makes in a Dewalt DW735 Thicknesser
By crowie in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 11Last Post: 23rd May 2017, 08:14 PM -
Shelix Cutter Head for Carba-Tec CTJ-381 Thicknesser
By bobcarter in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 22nd September 2016, 11:38 PM -
Cant decide - Carbatec spiral head cutter or buy Dewalt and retrofit with Byrd?!
By zoovegroover in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 28th December 2015, 06:40 PM -
depth of cut with shelix heads in 15" thicknesser
By Kuffy in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 24th November 2014, 05:36 PM